1.
CAUTION Incorrect use of batteries may lead to leakage or rupture. Always be sure to follow these instructions. A. Never mix new and used batteries.
2.
Two DURACELL® 'AA' MN1500 1.5V ALKALINE dry cell batteries
B. Batteries of the same size may have different voltages depending on their type. Do not mix different types of batteries.
9 ( 9
(
Remote control operation range
Battery replacement
Replace the batteries when any of the following phenomena is observed. � The transmitting LED does not blink even when the TV POWER button is pressed. � The remote control operation range has reduced. When replacing the batteries, prepare new batteries before removing the old batteries.
30� 30� 23 feet (7m)
INTRODUCTION
Be sure to close the battery case cover after battery replacement.
NOTE: � Even when batteries are removed, learned commands remain in memory for about 15 minutes. � If you remove the batteries, and press a button, the memory is erased in a few seconds.
� Furniture and other obstacles may block the infrared light beam so that it cannot reach the sensor behind the Projection Monitor's screen. � Performance of the remote control unit is adversely affected by strong fluorescent light. Keep such lights away from the screen in particular.