PIONEER SD582HD5
Manual de Servicio

USING THE DIGITAL TUNER (sold separately) TO WATCH DTV

1
TV
TV/ CBL VCR DVD DTV /SAT /LD

Set the SYSTEM MODE to ON. (Refer to page 66.)
� � Monitor input will be fixed to INPUT 1 and the picture from the input source selected by the receiver displayed. To watch TV, switch the receiver input to where the monitor�s TV OUTPUT signal connects. Channels can be selected using the monitor�s remote control.

POWER

TV

ON/OFF

DTV

�
4

INPUT

1
SPLIT

2
SEARCH

3
SELECT

2
SUB CH
DISPLAY

Watching DTV
1 Switch the receiver to where the digital tuner�s signal connect. 2 Set the mode switch to TV/DTV on the monitor�s remote control. 3 Press the DTV button on the monitor�s remote control.
� � Switching the monitor to DTV mode makes it possible to view a high-quality 1080i picture. Each time the DTV button is pressed, the operating mode will switch between DTV and TV mode. To change the input source, first switch to TV mode and then use the receiver to switch the input source.

SCREEN
MODE

ANT

FREEZE

DTV
AUDIO

1 4 7

2 5 8 0
¢

3 6 9
ENTER

CH

CH
RETURN

CH
MUTING

VOL
4

EDIT/
LEARN

TV/SAT/DVD
MENU

DTV/DVD TOP
MENU

SOURCE
POWER

DTV/SAT

4 Use the monitor�s remote control to select the channel. 5 Use the receiver to adjust the volume or select surround settings.

5 2
SET/ ENTER

GUIDE

3
DTV/(SAT)
INFO
VCR REC

8
1
POWER

�
FAVORITE CH

7
INPUT

3
VOL

¡
VOL

RECEIVER

PROJECTION MONITOR RECEIVER REMOTE CONTROL UNIT

�

OTHERS

NOTES: � When SYSTEM MODE is turned ON and the system is connected to a non-Dolby Digital receiver, no DTV audio output will be produced, and SYSTEM MODE should accordingly be turned OFF at such times. � Turning SYSTEM MODE ON will cause all monitor input to be input from INPUT 1, and SYSTEM MODE should accordingly be turned OFF when connected to RGB input.

85
<ARB1527>