1-4-2. Tray Mounting <The First Tray 1 Mounting> 1. Mount the first tray 1 by fitting to the bosses at two locations after sliding the upper wing to the inner side. 2. Slide the first tray 1 to front side (arrow A direction) until it stops.
Upper wing (mounted with the first tray 1 .) Upper side
<Tray mounting> 1. Remove the gear (1). 2. Insert the tray (2) horizontally. 3. Set the gear (1) to fit the rack gear of the tray. 4. Insert the tray (2) to the inner side until it stops. 5. Turn the gear (3) to confirm the movement.
Rack gear of tray
Lower side Lower wing Boss Upper wing
First tray 1 Label of first tray
Gear (1)
Gear (1)
1
A
Lower wing
Tray (2)
Gear (3)
Fig. 2-1-25 <The Second Tray 2 Mounting> 1. Insert the second tray 2 along the lower groove. 2. Turn the gear clockwise until it stops and descend the tray.
Insert along the lower groove. Tray
