PANASONIC SCHT640W
Manual de Usuario

Adjusting the volume of each speaker: Speaker level adjustments
This is one of the ways to get appropriate surround effects. Preparation Press [DVD].

1

While stopped and no on-screen display is shown

Press and hold [�TEST] to output a test signal.
� To stop the test signal, press and hold [�TEST] again. L: Front left RS: Right surround C: Center LS: Left surround R: Front right

� There is no output from SW (subwoofer) channel.

2 3

Press [VOLUME, r] or [s] to set the volume level normally used for listening. Press [3] (increase) or [4] (decrease) to adjust the speaker level for each speaker.
� Adjust the speaker levels to the same level as the front speakers. C, RS, LS: `6 dB to i6 dB

� To adjust speaker level during play
[Effective when playing multi-channel audio or when Dolby Pro Logic II or Sound Field Control (MOVIE, SPORT or MUSIC) is on, and Surround Music is off.] 1 Press [CH SELECT] to select the speaker. L #C #R #RS #LS #SW ^-----------------------------------------------------} SW: Subwoofer � You can adjust SW only if the disc includes a subwoofer channel. � �SW� does not appear on the display and is not adjustable when ��PLII� is lit. � �S� appears on the display when �MOVIE�, �SPORT� or �MUSIC� is selected with Sound Field Control (� page 26). In this case, you can adjust both surround speaker levels at the same time using [3, 4]. S: `6 dB to i6 dB 2 Press [3] (increase) or [4] (decrease) to adjust the speaker level for each speaker. C, RS, LS, SW: `6 dB to i6 dB (L, R: Only the balance is adjustable.) � To adjust the balance of the front speakers, while �L� or �R� is selected, press [2, 1].

RQT8611

Using sound effects

27