PHILIPS SBCTT100/19
Manual de Usuario

Congratulations! The product you have just purchased offers you exceptionally high quality reception. Please read the following instructions before using the indoor antenna, and retain this booklet for future reference.

12VDC

Radio

Portable amplified indoor FM antenna SBC TT100

GB Instructions for use
Batteries � Insert two LR03 or AAA batteries as indicated. � Remove the batteries when empty or when they are not to be used for a long time. Note: the antenna is also fitted with a 12 VDC supply socket for use in caravans, campers, boats, etc. (12V DC/100mA supply required, not included). � Connect the signal cable plug coming from the FM antenna to the antenna socket of the FM radio. � Press the power button on the antenna. The red LED lights up. Your radio now receives signals directly from the SBC TT100 antenna. � Turn the antenna around until optimum reception is obtained. � To obtain the best reception, vary the length and angle of the telescopic aerial. � Switch off the antenna by pressing the power button. The red LED goes out.

Radio
AM ANT. FM ANT.

1
Notes The base of the antenna has four rubber pads which provide stability and which are ideal for all surfaces. The label containing technical data can be found at the base of the antenna.

Technical features � Gain (antenna + amplifier): FM 19 ±3dB, � Power supply: battery operated 2 x LR03 AAA � External supply: 12 V DC (car battery) or AC/DC adapter � Power consumption: 5mA (battery operated) � VDE approved � Safety regulations according to EN 60065

PHILIPS

2 x LR03/AAA

2
2 15