Setting descriptions
A DR COMP - Dynamic range compression
Change this setting to listen to software recorded with Dolby Digital at low volume (such as late at night) and maintain audio clarity. It reduces the peak level in loud scenes without affecting the sound field. OFF: The software is played with the original dynamic range (factory setting). STANDARD: The level recommended by the producer of the software for household viewing. MAX: The maximum allowable compression (recommended for night viewing).
Changing the settings
1. Press [MEMORY] and [TUNE MODE] at the same time to enter the setting mode. 2. Press [MEMORY] to select the item you want to change. 3. Change the settings.
A DR COMP
Press [TUNING 2 or 1] to select �OFF�, �STANDARD� or �MAX�.
B D � INPUT
1 Press [TUNE MODE] to select �DVD� or �TV�. 2 Press [TUNING 2 or 1] to select �OPT� or �COAX�.
B D � INPUT - Digital input
You can change the digital input settings for DVD and TV, for example, if your equipment doesn�t have an optical output terminal, to coaxial input if necessary. (Note that one of the terminals will remain unused, whatever the setting.) The factory settings are: DVD: OPT 1 TV: OPT 2
C LIGHT
Press [TUNING 2 or 1] to select �ON� or �OFF�.
D A/D ATT
Press [TUNING 2 or 1] to select �OFF� or �ON�.
C LIGHT
If the room is darkened and the display is too bright, turn off the display light. The factory setting is ON.
E PL2 MODE 2
Press [TUNING 2 or 1] to select �MOVIE� or �PL�.
4. Press [MEMORY] and [TUNE MODE] at the same time to exit the setting mode.
RQT6501 Others
D A/D ATT - A/D attenuator
Turn the A/D attenuator on if �OVERFLOW� lights frequently when using 2-channel analog input or DVD 6CH input. The factory setting is OFF.
E PL2 MODE - Dolby Pro Logic 2 mode 2
There is a difference in sound quality between Dolby Pro Logic and Dolby Pro Logic 2. If you want to have similar effects to Dolby Pro Logic, change the setting to �PL�. The factory setting is MOVIE.
