Other speaker setup options
� Attaching to a wall
1 Drive a screw (not included) into a wall. 2 Fit the speaker securely onto the screw(s) with the hole(s). �The wall or pillar on which the speakers are to be attached should be capable of supporting 10 kg (22 lb.) per screw. Consult a qualified building contractor when attaching the speakers to a wall. Improper attachment may result in damage to the wall and speakers. �7.5�9.4 mm (19/64q� 3/8q) 8�11 mm (3/8q� 7/16q) Wall or pillar 30�35 mm (13/16q�13/8q)
e.g.
Front speaker
Center speaker
110 mm (411/32q) So that the speaker fits up against the wall squarely, be sure to press the speaker cable down into the groove.
In this position, the speaker will likely fall if moved to the left or right.
Move the speaker so the screw is in this position.
� Fitting speaker stands (not included)
Ensure the stands meet these conditions before purchasing them. Observe the diameter and length of the screws and the distance between screws as shown in the diagram. �The stands must be able to support over 10 kg (22 lb.). �The stands must be stable even if the speakers are in a high position. e.g. Front speaker
5 mm (13/64z), pitch 0.8 mm (1/32z)
60 mm (223/64z)
Speaker stand (not included)
Attach the stands to these metal screw holes.
Plate thickness plus 7 to 10 mm (plus 9/32z to 25/64z)
