PANASONIC SAAK110
Manual de Usuario

Using the timers
SLEEP CLOCK AUTO OFF TIMER UTO PLAY PL REC

DISC

1
PROGRAM

2 5 8 0
CD

3 6

To cancel the timer Press [rPLAY/REC] to clear the timer indicator from the display. (The timer comes on at the set time everyday if the timer is on.)

4
S.SOUND EQ

To change the settings (when the unit is on)
7 9

PRESET EQ
10

To change the play/record times Do steps 1, 2, 3 and 5. To change the source or volume 1. Press [rPLAY/REC] to clear the timer indicator from the display. 2. Make changes to the source or volume. 3. Do steps 4 to 5. To change the timer Press [rPLAY/REC] to select the desired timer. Every time the button is pressed:
PLAY (off) REC

TUNER
BAND

TAPE

AUX

VOL
MUTING REW CLEAR

VOL
FF

CD DISP DIMMER PLAY MODE

Using the play/record timer
Remote control only
You can set the timer to come on at a certain time to wake you up (play timer) or to record a radio station or from the aux source (record timer). The play and record timers cannot be used together. Preparations: � Turn the unit on and set the clock (A page 12). � For the play timer, prepare the desired music source (tape/CD/ radio/aux), and set the volume.

To check the settings Press [CLOCK/TIMER] while the unit is on to select �rPLAY� or �rREC�. The settings are shown in the following order: Play timer: start time�finish time�source�volume Record timer: start time�finish time�source To check the settings while the unit is off, press [CLOCK/TIMER] twice. If you use the unit after the timers are set After using, check that the correct tape/CD are loaded before turning the unit off. Notes

�

For the record timer, check the cassette�s erasure prevention tabs (A page 11) and insert the tape in deck 2 (A page 10). Tune to the radio station (A page 7) or select the aux source (A page 11).

� �

If you turn the unit off and on again while a timer is functioning, the finish time setting will not be activated. If you selected AUX as the source, when the timer comes on, the unit turns on and engages �AUX� as the source. If you want to playback or record from a connected unit, set that unit�s timer to the same time. (See the connected unit�s instruction manual.)

1 Press [CLOCK/TIMER] to select the timer function.
Every time you press the button:
CLOCK PLAY REC

Previous display rPLAY: to set the play timer rREC: to set the record timer

Using the sleep timer
Remote control only
This timer turns the unit off after a set time. While enjoying the desired source:

2 ON time setting
1 (Within 8 seconds or so) Press [g, REW/3] or [f, 4/FF] to set the start time. 2 Press [CLOCK/TIMER].

3 OFF time setting

Press [SLEEP] to select the time (minutes).
Every time you press the button:

1 Press [g, REW/3] or [f, 4/FF] to set the finish time. 2 Press [CLOCK/TIMER].
The start and finish times are now set.

SLEEP 30

SLEEP 60

SLEEP 90

SLEEP 120

SLEEP OFF

4 Press [rPLAY/REC] to display the timer indicator.
Every time you press the button:

To cancel the sleep timer Press [SLEEP] to select �SLEEP OFF�. To confirm the remaining time Press [SLEEP] once. The remaining time is shown for about 5 seconds. To change the setting Press [SLEEP] to select the new setting. You can use the sleep timer in combination with the play/record timer. Make sure the unit is off before the play/record timer�s start time. Note The sleep timer will be turned off when you start recording from a CD.

PLAY

REC

(off) rPLAY: to turn the play timer on rREC: to turn the record timer on (The indicator doesn�t appear if the start and finish times or the clock hasn�t been set.)

5 Press [f] to turn the unit off. f
The unit must be off for the timers to operate. � Play timer: Play will start in the set condition at the set time with volume increasing gradually to the set level.

� Record timer:

The unit comes on 30 seconds before the set time with the volume muted.

13
RQT6693

Reference Timer operations