AEG S2733-6I
Manual de Usuario

Open the appliance door and the furniture door at 90¡. Insert the small square (B) into guide (A). Put together the appliance door and the furniture door and mark the holes as indicated in the figure. Remove the squares and drill holes with ¿ 2 mm at 8 mm from the outer edge of the door. Place the small square on the guide again and fix it with the screws supplied.

8mm

A B

PR167

At the end of installation adjusting, it is necessary to check if the door of the furniture closes properly. Should the lining up of the furniture door be necessary, use the clearance of slots.

PR168

Fix cover (D) on guide (B) until it clips into place.

B

D
PR167/1

23