AEG S1583TK7
Manual de Usuario

The appliance is supplied with a 13 amp plug fitted. In the event of having to change the fuse in the plug supplied, a 13 amp ASTA approved (BS 1362) fuse must be used. Important The wires in the mains lead are coloured in accordance with the following code: GREEN & YELLOW 13 AMP. FUSE Green and Yellow: Earth Blue: Neutral Brown: Live As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in BROWN your plug, proceed as follows: BLUE CORD CLAMP 1.The wire coloured green and yellow must be
07

connected to the terminal marked with the letter �E� or by the earth symbol or coloured green and yellow. 2.The wire coloured blue must be connected to the terminal �N� or coloured black. 3.The wire coloured brown must be connected to the terminal marked �L� or coloured red. 4.Upon completion there must be no cut, or stray strands of wire present and the cord clamp must be secure over the outer sheath. Warning! A cut-off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that the cut-off plug is disposed of safely.

Plug socket
The plug socket necessary for connection of your appliance to the electricity supply should be positioned so that it is possible to pull out the appliance plug. If your appliance is installed under a continuous worktop, the plug socket should be provided as shown. Alternatively a concealed spur socket fitted with a 13 A fuse may be fitted. If the socket is not accessible once 130 the appliance is built in, the electrical installation must include suitable means of isolating the appliance from the mains (e.g. fuse, cut-out, current 300 trip or similar with a minimum contact separation of 3 mm).
AEG44

13 AMP

11