Up to twelve FM and AM stations each can be programmed. If broadcast frequencies are preset in the memory, you can easily tune in any of these frequencies. You can preset just those stations you like.
1 2 3
Set [
] to �TUNER�.
Press [BAND] to select �FM� or �AM�.
Every time you press the button: FM � AM
Press [MEMORY].
� � and the frequency flash.
1
4
While � � and the frequency are flashing: Press [�/g] or [f/+] to select the desired station.
� � lights when an FM stereo program is being received. Reference You can select the desired broadcast by using �Automatic tuning�. (See page 9.)
2
5 6
Press [MEMORY].
�
� and the preset channel number flash.
3
7
While � flashing:
� and the preset channel number are
Press [�/g] or [f/+] to select the preset channel.
� indicator goes off during programming, return to
Press [MEMORY].
If the � step 3.
4
Repeat steps 3 to 7 to program other stations. RX-D11 only
When using the remote control Preparation: Set [ ] to �TUNER�.
5
1. Press [BAND] to select �FM� or �AM�. 2. Press [MEMORY/PGM]. 3. While � � and the frequency are flashing: Press [�/g] or [f/+] to select the desired station. 4. Press [MEMORY/PGM]. 5. While � � and the preset channel number are flashing: Press [3] or [4] to select the preset channel. 6. Press [MEMORY/PGM]. Preset channel Repeat steps 2 to 6 to program other stations.