4. Press BALANCE/SURROUND ADJUST repeatedly until �CENTER TONE� appears on the display. The display changes to show the current setting. 5. Turn MULTI JOG to select the center tone level you want, while the indication of the previous step is still on the display. As you turn it, the display changes to show the following:
BALANCE/SURROUND ADJUST
Note:
The center tone cannot be adjusted when �CENTER SPK� is set to �NONE� (see page 24).
MULTI JOG
SOFT2
SOFT1
FLAT
SHARP1
SHARP2
If you have selected Theater Surround, go to the following steps. 6. Press BALANCE/SURROUND ADJUST repeatedly until �DSP EFFECT� appears on the display. The display changes to show the current setting. 7. Turn MULTI JOG to select the effect level, while the indication of the previous step is still on the display. As you turn it, the effect level changes as follows: DSP EFFECT 1 DSP EFFECT 2 DSP EFFECT 3
BALANCE/SURROUND ADJUST
Note:
When you have selected Dolby Pro Logic, you cannot select the effect level.
MULTI JOG
DSP EFFECT 5
DSP EFFECT 4
As the number increases, the surround effect becomes stronger.
Note:
Once you have adjusted the Surround modes, the adjustment is memorized for each Surround mode.