|
|
|
Usuarios conectados
Actualmente hay 6040 visitantes online. |
|
Productos
|
|
Información
|
|
Destacado
|
|
|
 |
|
|
No hay comentarios de productos.
Basic Operations
Adjusting the Volume
On the front panel:
To increase the volume, turn MASTER VOLUME clockwise. To decrease the volume, turn it counterclockwise. When you turn MASTER VOLUME rapidly, the volume level also changes rapidly. When you turn MASTER VOLUME slowly, the volume level also changes slowly.
�
MASTER VOLUME
+
CAUTION: Always set the volume to the minimum before starting any source. If the volume is set at its high level, the sudden blast of sound energy can permanently damage your hearing and/or ruin your speakers.
Note:
The volume level can be adjusted within the range of �0� (minimum) to �62� (maximum).
From the remote control:
To increase the volume, press VOLUME +. To decrease the volume, press VOLUME �.
VOLUME
Selecting the Front Speakers
Notes:
On the front panel only:
1
SPEAKERS 2
� When only one set of the front speakers is SPEAKERS 1 or the FRONTconnected to either
2 terminals, do not press both SPEAKERS 1 and 2 to set them in the _ON position. If you do, no sound comes out of the front speakers. � The SPEAKERS 1 and 2 buttons do not affect the sound output of the center and rear speakers.
When you have connected two sets of front speakers, you can select which to use. Pressing SPEAKERS 1 or SPEAKERS 2 activiates the respective set of speakers.
_ON �OFF
To use the set of speakers connected to the FRONT SPEAKERS 1 terminals, press SPEAKERS 1 to set it in the _ON position, and press SPEAKERS 2 to set it in the � OFF position. To use the set of speakers connected to the FRONT SPEAKERS 2 terminals, press SPEAKERS 2 to set it in the _ON position, and press SPEAKERS 1 to set it in the � OFF position. To use both set of speakers, press both SPEAKERS 1 and 2 to set them in the _ON position. To use neither set of speakers, press both SPEAKERS 1 and 2 to set them in the � OFF position.
Muting the Sound
From the remote control only:
Press MUTING to turn off the sound through all speakers and headphones connected. �MUTE� appears on the display and the volume turns off. To restore the sound, press MUTING again. Turning MASTER VOLUME or pressing VOLUME +/� also restores the sound.
MUTING
15
|
|
|
> |
|
