Adjusting the Super Woofer Volume
You can adjust the bass level between BASS 1 (minimum) and BASS 6 (maximum). You can use this effect only for playback.
Using the Remote Control �����
s Press the MID/TREBLE button to select MID 1.
or TREBLE.
Each time you press the button, the display changes as follows: MID=TREBLE=Current sound source=(back to the beginning)
Using the Unit �����������
Turn the SUPER WOOFER VOLUME control clockwise to increase the bass level or turn it counterclockwise to decrease the bass level.
SUPER WOOFER VOLUME
s Press the VOLUME + or VOLUME � button 2.
within five seconds to adjust the mid or treble level.
MID / TREBLE
or
VOLUME
SUPER WOOFER VOLUME
(Within 5 seconds)
Using the Remote Control �����
Press the SUPER WOOFER VOLUME + button to increase the bass level or press the SUPER WOOFER VOLUME � button to decrease it. Note: This function is not effective when the headphones are in use.
Showing the Time (DISPLAY)
In Standby mode, the backlight of the display goes out, and the "CLOCK" indicator and the current time (clock) appear on the display. While the power is turned on, you can see the current time (clock) at any time, as follows: Press the DISPLAY button on the Remote Control. Each time you press the button, the display changes as follows: Current sound source (e.g. FM103.5 MHz)=Clock=(back to the beginning) Note: To let work the clock, you need to set the clock first. (See "Setting the Clock" on page 23.)
Tone Control (MID/TREBLE)
You can control the tone by changing the mid and the treble between �6 and +6. (0: Flat)
Using the Unit �����������
s Press the MID/TREBLE button to select MID 1.
or TREBLE.
Each time you press the button, the display changes as follows: MID=TREBLE=Current sound source=(back to the beginning)
s Turn the VOLUME control clockwise or 2.
VOLUME
counterclockwise within five seconds to adjust the mid/treble level.
MID / TREBLE
MID / TREBLE
