SHERWOOD RNC-500
Manual de Usuario

8. Erasing Existing Programming
8. Press a single button if you wish to erase individual buttons one at a time. This will show all the functions in the device. Press the button you wish to erase. 9. Repeat from Step #5 to erase any other devices or learned buttons you require. 10. Press the MAIN button to exit to main Erase mode. Press the MAIN button once again to exit the SETUP mode. B. Erasing Favorite Channel Buttons 1. Go to the SETUP mode by pressing both the MAIN and ENTER buttons simultaneously for three seconds. 2. Press the ERASE button next to the LCD screen. 3. Press the FAV button.

8. Erasing Existing Programming

7. Press the MAIN button to exit to main Erase mode. 8. Press the MAIN button once again to exit the SETUP mode. C. Erasing Macro Functions 1. Erase M1, M2, M3, POWER and SYSTEM OFF Buttons 1. Go to the SETUP mode by pressing both the MAIN and ENTER buttons simultaneously for three seconds. 2. Press the ERASE button next to the LCD screen. 3. Press the MACRO button. 4. If you wish to erase all of the macro buttons in the MX-500TM, press the ALL button and then press the SURE?

4. If you wish to erase all the favorite channel buttons in the MX-500TM, press the ALL button and then press the SURE? button at the next LCD screen. 5. If you wish to erase one button, press the KEY button. Press the individual button you want to erase and continue with any other individual buttons you want to erase. 6. Repeat from Step #5 to erase any favorite channel buttons you require.

button at the next LCD screen. 5. If you wish to erase just one of the macros, press the KEY button at step 4 and then one of the M1, M2, M3, POWER or SYSTEM OFF buttons to erase the macro functions from that button. 6. Repeat from Step #5 to erase any other macro buttons you require. 7. Press the MAIN button to exit to main Erase mode. Press the MAIN button once again to exit the SETUP mode.

35

36