Selecting a Sound Field
If you selected the tape deck Move the easy scroll key to display the information about deck A or B.
Note
When the remote is programmed to control a non-Sony tape deck, the following may occur: � The information about deck B is not displayed and you cannot switch between tape deck A and B. � �TAPE A/B� is displayed and tape deck A and B switch automatically each time you press the easy scroll key, etc.
Do the procedure below to select a sound field from the sound field list. Note that the sound fields contained in each list will vary depending on the receiver.
1 2
Press SOUND FIELD. The sound field list appears. Using the Lists Move the easy scroll key to select the sound field, then press the key to enter the selection. A display example
If you selected the 2ND AV/2ND AUDIO source Move the easy scroll key to select the source of 2ND AV/ 2ND AUDIO, then press the key.
Note
Depending on the component you are using, �2ND AUDIO� or �2ND AV� may not be displayed.
NORMAL CINEMA CINEMA CINEMA
SURROUND ST.EX.A ST.EX.B ST.EX.C
To turn off the sound field Move the easy scroll key to select either �2CH STEREO� or �A.F.D.� in the sound field list in the display. The sound field list that is displayed is different depending on the model.
