WHIRLPOOL RM978BXVW1
Manual de Usuario

Using the Self-Cleaning

Cycle

The Self-Cleaning cycle uses very high heat to burn away soil. Before you start, make sure you understand exactly how to use the Self-Cleaning cycle safely.

Before You Start 1. Clean the shaded areas by hand.
They do not get hot enough during the Self-Cleaning cycle for soil to burn away. Use hot water
and detergent or a soapy steel

DO NOT clean the fiberglass seal. DO NOT move if or bend if. Poor cleaning and poor baking will resuli 2. Remove the broiler pan and any pots and pans you may have
stored in the oven. They can�t stand the heat.

wool pad on... l The inside of the door. The frame around the oven. l

3. WiDe ouf anv loose soil or
grease. This will help reduce
during the Self-Cleaning smoke Cycle.

4. If the oven has a rotisserie, make sure the motor socket cover is closed. 5. If you want the oven racks to remain shiny, remove from the oven and clean by hand. Ctherwise, put oven racks on second and fourth guides (guides are counted from bottom to top). After racks are cleaned in the SelfCleaning cycle, they become harder to slide. See chart on page

22. Chrome reflector bowls must not be cleaned in the oven. They will discolor.

Turn on the vent hood or other kitchen vent during the Self-Cleaning cycle. This will help remove heat and odors that are normal during the cycle.

SPECIAL CAUTIONS: DO NOT use commercial oven cleaners In your oven. Damage to fhe porcelain finish may occur. DO NOT force the lock lever, you could bend or break if. The lever is designed to stay locked until the oven is cool enough to safely open. Waif until if moves freely. DO NOT use foil or other liners in the oven. During the Self-Cleaning cycle foil can burn or melt and damage the oven surface. DO NOT block the vent during the Self-Cleaning cycle. Air must move freely for best cleaning results.