WHIRLPOOL RM278PXP0
Manual de Usuario

Using the Self-Cleaning
Before you start

cycle

The self-cleaning cycle uses very high heat to burn away soil. Before you start, make sure you understand exactly how to use the cycle safely.

1. Clean the shaded areas by hand. They do not get hot enough during the Self-Clean cycle for soil to burn away. Use hot water and detergent.or a soapy steel-wool pad on... the frame around the oven. l

DO NOT clean the fiberglass seal. DO NOT move it or bend it. Poor cleaning and poor baking will result.

2.

Remove the broiler pan and any pots or pans you may have stored in the oven. They cant stand the high heat. Wipe out any loose soil or grease This will help reduce smoke during the cleaning cycle. If your oven has a rotissene. make sure the motor socket cover is closed. Put oven racks on the second and fourth guides. During the SelfCleaning Cycle they will darken and become harder to slide. See tips on page 18. If you want the oven racks to remain shiny, clean them by hand.

DO NOT
Clean Seal Clean Door Clean

Frame

Turn on the vent hood or other kitchen vent during the cleaning cycle. This will help remove smoke, odor and heat that are normal during the cycle SPECIAL CAUTIONS: DO NOT use commercial oven cleaners in your oven. Damage the porcelain finish may occur.

to

DO NOT force the Lock Lever, you could bend or break it. The lever is designed to stay locked until the oven is cool enaugh to safely open. Wait until it moves freely. DO NOT use foil or other liners in the oven. During the cleaning cycle foil can burn or melt and damage the oven surface.

12