WHIRLPOOL REL3612BW0
Manual de Usuario

Using

the

Damp

Dry cycle

Use this cycle to dry damp items that do not require an entire drying cycle, or to dry items to damp level. Two examples are heavy cottons, such as jeans, which you do not want to become stiff, or cotton clothes which are easier to press when damp. 1. Set the Cycle Control Knob on DAMP DRY. 2. Push the Start Button. The last few minutes of this cycle are without heat to make the load easier to handle.

Caring
In This Section
Maintenance-every

For Your Dryer
Page load . . .. . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . 8 Mainlenance-as needed Page .. ... . .... . ... ... .... .... . ... .. . .. 9

Dryers require

regular

maintenance.

Follow the suggestions

below to maintain

your dryer properly.

Maintenance-every
Cleaning the lint screen

load
Product and Fabric Damage Hazard
Do not run the dryer with the lint screen loose, damaged, blocked or missing. Doing so can cause overheating and damage to both the dryer and fabrics.

The lint screen is located under a lid on top of the dryer. Clean It before each load. A screen blocked by lint can increase drying time.

1. Open the lid and pull the lint screen straight
out.

2. Roll lint off the screen with your fingers. Do not rinse or wash the screen to remove lint. Wet lint is hard to remove. 3. Push the lint screen firmly back into place and close the lid.