OWNER�S MANUAL AND INSTALLATION GUIDE
PLANNING YOUR INSTALLATION
Carefully read and understand the following instructions before you attempt any installation procedures. Plan for adequate time and the possibility of overnight storage of your vehicle, since it may take more than one day to complete an installation. Unpack and examine the components. Verify that your package includes the following: � Two 165 mm (6 1 �2") woofers with grilles and grille trays � Two 102 mm (4") midrange drivers with grilles and grille trays � Two 19 mm (3 �4") soft-dome tweeters with surface-mount plates, flush-mount kits, and attached color-keyed wires � One integrated stereo passive crossover network � Mounting templates for all speaker components � Complete mounting hardware, including hook-up wire
� LO HI TO LEFT
As you survey your vehicle, keep the following installation sequence in mind: 1. Studying the system applications shown in Figures 1 through 3, including application notes on page 5 2. Choosing locations for the speaker components (see Speaker Placement) 3. Selecting a crossover location that will make use of the color-keyed wires and attached terminals 4. Installing the crossover and running speaker wires to the amplifier(s) 5. Installing the speaker components and connecting speaker wires 6. Testing the audio system and finishing the installation
SYSTEM APPLICATIONS
The Infinity Reference 6513cs can be configured for use with one to three amplifiers, as shown in Figures 1 through 3. After studying the illustrations, read the application notes on page 5 for specific wiring details.
Amplifier
+ � � +
LEFT
Connect Pigtail Jumpers As Shown
GRN RED +
GRN/BLK
GRN/WHT BLK �
GRN
� BLK
+ RED
BLU/BLK To LEFT 6x9" Woofer
�
+ HI
REFERENCE STANDARD AUTOMOTIVE
Component System Crossover Network
TO LEFT MIDRANGE + �
LO HI
WOOFER
HI LO �
BLU
TO LEFT TWEETER + �
LO MID HI
TO RIGHT TWEETER +
HI MID LO
TO RIGHT MIDRANGE + �
HI LO
GRY/ BLK
RED/ BLK RED
RED/ WHT RED
GRY
GRY
� + HI
To LEFT 4" Midrange To LEFT Tweeter
+ HI �
To RIGHT 4" Midrange
� + MID
+ MID �
To RIGHT Tweeter
WOOFER
GRY/ WHT
+
FROM RIGHT AMPLIFIERS
�
MIDRANGE EMIT TWEETER
+
�
+
�
EMIT TWEETER MIDRANGE
�
FROM LEFT AMPLIFIERS
+
�
+
WOOFER
�
+
Figure 1. This application shows connections for a Reference 6513cs system and one stereo amplifier.
