TOSHIBA RD-XS32SB
Manual de Servicio

1-1-5. Operation Panel Door 1. Open the operation panel door (1). 2. Release two claws and unhinge the door (1).

Front panel Hinge Claw

Claw

Operation panel door (1)

Hinge

Fig. 2-1-5 1-1-6. RAM Drive 1. Remove the HDD. (Refer to item 1-1-2.) 2. Peel off the tape (1). 3. Disconnect the flexible cables (2). 4. Disconnect the connector (3). 5. Remove two screws (4) and acrylic board (5). 6. Remove four screws (6), then remove the RAM drive (7).
Connector (3) Screws (6) Acrylic board (5) RAM drive (7) Tape (1)

Flexible cable (2)

Screws (4) Lay the wire under the RAM drive (7)

Claw

A

A Connector Remove the connector claw in the direction indicated by the arrows to release the flexible cable. Flexible cable (2)

Fig. 2-1-6