ONKYO RDV-1.1
Manual de Usuario

Connecting�Continued
Connecting the Power Cord
Notes: � Before connecting the power cord, complete all of the necessary audio and video connections. � Do not use a power cord other than the one supplied with the RDV-1.1, which is designed exclusively for use with the RDV-1.1 and should not be used with any other component. � Never disconnect the power cord from the RDV-1.1 while the other end is still plugged into a wall outlet. Doing so may cause an electric shock. Always disconnect the power cord from the wall outlet �rst. � The RDV-1.1 is shipped with the Power switch in the On position ( ). When the power cord is connected for the very �rst time, the RDV-1.1 will go on Standby and the Standby indicator will light up. � To completely shutdown the RDV-1.1, set the Power switch to the Off position ( ).

DVD CHANGER

MODEL NO.

DPC-7.4
AC INLET

1 2

Plug the supplied power cord into the RDV-1.1�s AC INLET. Plug the other end of the power cord into a suitable AC wall outlet. The Standby indicator lights up. The Standby indicator comes on only if the Power switch is in the On position ( ).

42