ROLAND RD-700
Manual de Usuario

Effect/Parameter List

Level (Output Level) Adjust the output level.

23: FBK PCH SHIFT (Feedback Pitch Shifter)
This pitch shifter allows the pitch shifted sound to be fed back into the effect. Coarse (Coarse Pitch) #1 Adjust the pitch of the pitch shifted sound in semitone steps (2�+1 octaves). Fine (Fine Pitch) #1 Make fine adjustments to the pitch of the pitch shifted sound in 2-cent steps (one cent is 1/100th of a semi tone). Feedback (Feedback Level) # Adjust the proportion (%) of the processed sound that is fed back into the effect. Negative (-) settings will invert the phase. Pre Delay (Pre Delay Time) Adjust the time delay from when the direct sound begins until the pitch shifted sound is heard. Mode (Pitch Shifter Mode) Higher settings of this parameter will result in slower response, but steadier pitch. Pan (Output Pan) Adjust the stereo location of the pitch shifted sound. L64 is far left, 0 is center, and 63R is far right. Low Gain Adjust the gain of the low frequency range. Positive (+) settings will emphasize (boost) the low frequency range. High Gain Adjust the gain of the high frequency range. Positive (+) settings will emphasize (boost) the high frequency range. Balance (Effect Balance) Adjust the volume balance between the direct sound and the pitch shift sound. With a setting of D100:0W only the direct sound will be output, and with a setting of D0:100W only the pitch shift sound will be output. Level (Output Level) Adjust the output level.

22: 2V PCH SHIFT (2 Voice Pitch Shifter)
A Pitch Shifter shifts the pitch of the direct sound. This 2-voice pitch shifter has two pitch shifters, and can add two pitch shifted sounds to the direct sound. Coarse A (Coarse Pitch A) #1 Adjust the pitch of Pitch Shift A in semitone steps (-2�+1 octaves). Fine A (Fine Pitch A) #1 Make fine adjustments to the pitch of Pitch Shift A in 2-cent steps (-100�+100 cents). One cent is 1/100th of a semitone. Pan A (Output Pan A) Adjust the stereo location of the Pitch Shift A sound. L64 is far left, 0 is center, and 63R is far right. PreDelayA (Pre Delay Time A) Adjust the time delay from when the direct sound begins until the Pitch Shift A sound is heard. Coarse B (Coarse Pitch B) #2 Adjust the pitch of Pitch Shift B in semitone steps (-2�+1 octaves). Fine B (Fine Pitch B) #2 Make fine adjustments to the pitch of Pitch Shift B in 2-cent steps (-100�+100 cents). One cent is 1/100th of a semitone. Pan B (Output Pan B) Adjust the stereo location of the Pitch Shift B sound. L64 is far left, 0 is center, and 63R is far right. PreDelayB (Pre Delay Time B) Adjust the time delay from when the direct sound begins until the Pitch Shift A sound is heard. Mode (Pitch Shifter Mode) Higher settings of this parameter will result in slower response, but steadier pitch. Level Bal (Level Balance) Adjust the volume balance between the Pitch Shift A and Pitch Shift B sounds. When set to A100:0B, only the sound of Pitch Shift A is output; when set to A0:100B, only the sound of Pitch Shift B is output. Balance (Effect Balance) Adjust the volume balance between the direct sound and the pitch shift sound. With a setting of D100:0W only the direct sound will be output, and with a setting of D0:100W only the pitch shift sound will be output. Level (Output Level) Adjust the output level.

Appendices

24: REVERB
The Reverb effect adds reverberation to the sound, simulating an acoustic space. Type (Reverb Type) Select the type of Reverb effect. ROOM1: dense reverb with short decay ROOM2: sparse reverb with short decay STAGE1: reverb with greater late reverberation STAGE2: reverb with strong early reflections HALL1: reverb with clear reverberance HALL2: reverb with rich reverberance Pre Delay (Pre Delay Time) Adjust the time delay from when the direct sound begins until the reverb sound is heard.

111