JVC RC-EX36SJ
Manual de Usuario

RECORDING ON CASSETTE TAPES
You can record from the radio or the CD player. � It should be noted that it may be unlawful to re-record pre-recorded tapes, records, or discs without the consent of the owner of copyright in the sound or video recording, broadcast or cable program and in any literary, dramatic, musical, or artistic work embodied therein. � The recording level is automatically set correctly, so it is not affected by the other sound settings. Thus, during recording you can adjust the sound you are actually listening to without affecting the recording level. � If recordings you have made have excessive noise or static, the unit may be too close to a TV. Increase the distance between the TV and the unit. � You can only use type I tape for recording. � DO NOT turn off the unit while playing back or recording a tape. The cassette deck or tapes may be damaged. � DO NOT use type II and type IV tapes since the unit is not compatible with such tapes. � The use of C-120 or longer tape is not recommended, since characteristic deterioration may occur and this tape easily jams in the pinch rollers and the capstans. To protect your recordings Cassettes have two small tabs on the back to protect against unexpected erasure or re-recording. To protect your recording, remove these tabs. To re-record on a protected tape, cover the holes with adhesive tape. GROUP -/+

STANDBY/ON

CD door

) PUSH

4 (skip/search backward)
PRESET DOWN

Displaying the disc information (MP3 disc only) In stop mode: When you press 4 or ¢ to select a track, the group (album) number and group name\file name scroll through the display window, and then the current group (album) number and track number are displayed again. During playback: When you press and hold DISPLAY for more than 1 second, the title, artist name and album name* scroll

HANDLING CASSETTE TAPES
� If the tape is loose in its cassette, take up the slack by inserting a pencil in one of the reels and rotating. � If the tape is loose, it may get stretched, cut, or caught in the cassette.

STANDBY/ON

PROGRAM/ CLOC K SET

HBS/ PRESET EQ

PRESET UP

PROGRAM/ CLOCK SET ¢ (skip/search forward) STOP 7

PUSH

GRO UP
TA PE

TOP S AY PL USE /PA

� Be careful not to touch the tape surface. through the display window once, and then the track number being played and elapsed playing time are displayed again. PLAY/PAUSE 6 * If the track has no text information, �NO INFO� appears instead. � Avoid storing tapes in any of the following places: In dusty places In direct sunlight or heat In moist areas On a TV or speaker Near a magnet

RA
CD

ND

O

M

CD/RANDOM

BA

ND

TUNER

REMOTE SENSOR

DISPLAY

REPEAT
The REPEAT button repeats one track (REPEAT 1) or all tracks (REPEAT ALL). To scroll through the
STANDBY/ON CD/ RANDOM TUNER/ BAND TAPE

choices, continuously press and release REPEAT, and check the display to see which choice you have selected. The following chart illustrates how REPEAT works in various modes. NORMAL REPEAT ALL REPEAT 1 (For audio CD)

CD/RANDOM
DISPLAY HBS/ PRESET EQ FM MODE /BEAT CUT

1 4 7 0
UP PROGRAM/ CLOCK SET REPEAT

2 5 8

3 6

Number buttons
9
OVER INTRO MUTING

CLEANING THE TAPE HEADS
Clean the heads after every 10 hours of use with a wet-type head cleaning tape (available at electronic NORMAL REPEAT ALL REPEAT GROUP REPEAT 1 (For MP3 disc) and audio shops). Pinch roller Capstan To demagnetize the head Turn off the unit, and use a head demagnetizer (available at electronic and audio shops). Head Erasure head

+
GROUP

PROGRAM/CLOCKSET REPEAT

PRESET

DOWN

�

GROUP +/INTRO

RANDOM
In CD mode, press CD/RANDOM so that �RANDOM� appears in the display and random playback starts. To quit random play, press CD/RANDOM again.

VOLUME

RM-SRCEX30J REMOTE CONTROL

PROGRAMMING
1 Press CD/RANDOM to enter CD mode, if the unit is in TUNER or TAPE mode. You can press CD/RANDOM on the remote control unit to enter CD mode. 2 Press PROGRAM/CLOCK SET in stop mode. The PROGRAM indicator appears in the display window.
PROGRAM

Adhesive tape

RECORDING FROM THE RADIO
1. 2. 3. 4. Insert a cassette tape into the cassette deck and close the door. Press TUNER/BAND and select a radio station. Press REC ÷ to begin recording. REC ÷ and PLAY 2 are locked down. Press STOP/EJECT § to stop recording.

LOADING A CD
2. 3. 4. 5. 6.

1. Press CD/RANDOM; �READING� appears, then �NO DISC� appears in the display if no CD is loaded. Press ) PUSH to open the CD door. Place a CD into the tray with the label facing up. Close the CD door. Then the total number of tracks and total playing time appear. To remove the CD, press ) PUSH, grasp the CD by its edges, and carefully pull it out. When loading an MP3 disc, the MP3 indicator lights, and the total number of groups (albums) and total number of tracks appear in the display window.
MP3

TROUBLESHOOTING TIPS
Problem Solution � Make sure the power cord is securely plugged into the AC power outlet (or that the batteries are fresh). � Unplug the unit for a moment, and then plug it back in again. � Check the outlet by plugging in another device. � Adjust the volume setting. � Make sure you have selected the correct function: CD, TAPE, or TUNER and the headphones are disconnected. � Adjust the FM telescopic antenna for better FM reception. � Rotate the unit to achieve better AM reception. � Try turning off electrical appliances near the unit, such as TV, hair dryers, vacuum cleaners, or fluorrescent lights. � Make sure the tray contains a CD. � Make sure the CD�s label is facing up. � Make sure that pause mode is not activated. � Make sure the CD function is selected. � Clean the CD (as explained in �CARE AND MAINTENANCE�). � Check the CD for warping, scratches, or other damage. � Check for vibration or shock that may affect the unit; move system if necessary. � Inspect the recording head and clean it if necessary. � Demagnetize recording head (as explained in �CARE AND MAINTENANCE�).

FLAT

3 Press 4 or ¢ to select a desired track to be programmed. You can use the number buttons on the remote control unit to select a desired track.
PROGRAM

System does not turn on.

Using the beat-cut function When recording an AM broadcast, beats may occur. If this happens while recording an AM broadcast, press FM MODE/BEAT CUT on the remote control unit to select the better beat-cut setting, �CUT-1� or �CUT-2.� TIP To temporarily pause the recording, press PAUSE 8 on the cassette deck. Press PAUSE 8 again to resume recording.

Track to be programmed
FLAT

No sound

Total number of groups
FLAT

Total number of tracks

4 Press PROGRAM/CLOCK SET. 5 Repeat steps 3 and 4 to program other tracks. 6 Press PLAY/PAUSE 3/8. The tracks are played in the order you have programmed. Stopping programmed playback Press STOP 7. Checking the program contents Before starting programmed playback, press PROGRAM/CLOCK SET when �PROGRAM� is displayed. Each time you press the button, the programmed tracks are shown in the display window. Adding tracks in the program 1 Press PROGRAM/CLOCK SET repeatedly until �00� appears as a track number. 2 Press 4 or ¢ (or the number buttons on the remote control unit) to select a new track number, then press PROGRAM/CLOCK SET. Editing the program 1 Press PROGRAM/CLOCK SET repeatedly until the program number you want to edit appears. 2 Press 4 or ¢ (or the number buttons on the remote control unit) to select a new track number, then press PROGRAM/CLOCK SET. Erasing the entire program in the memory Press PROGRAM/CLOCK SET so that the �PROGRAM� appears, and press STOP 7 while the �PROGRAM� is displayed. The program is also cleared when you open the CD door, turn off the unit or change to other audio sources. Note You cannot program more than 40 tracks. �� � FULL � �� is displayed. For MP3 disc: 1 Press PROGRAM/CLOCK SET in stop mode. The PROGRAM indicator appears in the display window. 2 Press GROUP + or GROUP � to select a desired group (album). The first track number in the selected group (album) is shown. 3 Press 4 or ¢ to select a desired track in the group (album). You can use the number buttons on the remote control unit to select a desired track. 4 Press PROGRAM/CLOCK SET. 5 Repeat steps 2 to 4 to program other tracks. 6 Press PLAY/PAUSE 3/8. The tracks are played in the order you have programmed.

Poor radio reception

SYNCHRONIZED RECORDING FROM A CD
1. Insert a cassette tape into the cassette deck and close the door. 2. Press CD/RANDOM. 3. Place a CD you want to record into CD compartment. 4. Select the track you want to record by pressing 4 or ¢. 5. Press REC ÷ to start synchronized recording. � When the tape reaches the end, the CD playback enters in pause. To continue recording: To continue the CD playback: To stop the CD playback: turn over the tape and press REC ÷. press PLAY/PAUSE 3/8. press STOP 7.

PLAYING A CD
Press PLAY/PAUSE 6 to play all the tracks in order starting with track 1. The current track number and elapsed playing time appear in the display. Notes for MP3 files � When an MP3 disc is loaded, after the current track number and elapsed playing time are displayed for 5 seconds, the ID3 TAG information (title, artist name and album name) scrolls through the display window once, if the MP3 disc has ID3 TAG information. For displaying the disc information, see �Displaying the disc information�. � When an MP3 disc is loaded, it may take more than 30 seconds to be read, depending on the amount of information compiled in the disc. Notes � Press PLAY/PAUSE 6 to temporarily stop the CD. The track number and elapsed playing time flash in the display. Press PLAY/PAUSE 6 again to resume playing the CD. � Adjust VOLUME to a comfortable level. � Press STOP 7 to stop playing the CD. Wait a few seconds for the CD to stop turning, then press ) PUSH to open the CD door and remove the CD. � �NO DISC� may appear when the disc is loaded upside down. Reload the disc correctly. Skipping � To skip back to the previous track During playback, press 4 once to return to the beginning of the current track, press twice to skip back to the beginning of the previous track. � To skip to the next track During playback, press ¢ to skip to the beginning of the next track. Selecting a desired track directly Use the number buttons on the remote control unit. In case of an audio CD: Example: To select track 8, press 8. To select track 21, press OVER, 2, then 1. Playback starts from the specified track. In case of an MP3 disc: Example: To select track 8, press 8. To select track 21, press OVER, 0, 2, then 1. To select track 115, press OVER, 1, 1, then 5. Search � locating a desired position on the disc (audio CD only) Press and hold 4 or ¢ during playback. Monitor the sound and release the button when the desired position is located. Selecting a desired group (album) and track (MP3 disc only) 1 In stop mode, press GROUP + or GROUP � repeatedly until the desired group (album) number is displayed. 2 Press 4 or ¢ to select a desired track from the current group (album). 3 Press PLAY/PAUSE 3/8 to start playback. Note During playback, if you press GROUP + or GROUP �, playback skips to the first track of the next or previous group (album), and the track number is shown in the display window. Checking the remaining time (audio CD only) Press and hold DISPLAY (on either the main unit or the remote control unit) for more than 1 second during playback. Each time you press and hold the button, the display changes in the following order: Track number being played and elapsed playing time. Track number being played and remaining time of the track (�TRACK� and �REMAIN� appear.) Track number being played and remaining time of the disc (�TOTAL� and �REMAIN� appear.)

CD does not play.

CD sound skips.

Distorted or noisy recordings

� When the CD playback stops, the cassette tape continues running. To stop the cassette tape, press STOP/EJECT §. TIP Using the PAUSE 8 button on the cassette deck instead of the STOP/EJECT § button to momentarily interrupt recording gives you a much clearer sound recording.

SPECIFICATIONS
CD player
CD capacity Dynamic range Signal-to-noise ratio : 1 CD : 60 dB : 75 dB : FM 87.5 - 108.0 MHz : AM 530 - 1 710 kHz : Telescopic antenna for FM Ferrite core antenna for AM

ERASING
When recording on a pre-recorded tape, the previous recording is erased and only the new recording is heard next time the tape is played back. Erasing a recording on a tape without making a new recording 1. Press TAPE to enter the tape mode. 2 . Press REC ÷ to start recording.

Tuner
Frequency ranges Antenna

USING THE CD
THINGS TO KNOW BEFORE PLAYING CDs
Playable CDs: Only CDs bearing these marks can be used with this system.

Cassette deck section
Frequency response Wow and flutter : 60 Hz - 10 000 Hz : 0.15% (WRMS)

General
Speaker Power output Output terminals Power supply Power consumption Dimensions Mass Accessories provided : 9 cm (3.5�) cone � 2 (4 �) : 2 W per channel, min. RMS, driven into 4� at 1 kHz with no more than 10 % total harmonic distortion : PHONES � 1 (� 3.5 mm, stereo) : AC 120 V �, 60 Hz DC 9 V (�R20 (SUM-1)/D (13D)� � 6) : 18 W (at operation), 3 W (on standby) : 420 mm (W) � 178 mm (H) � 249 mm (D) (16 9/16 in � 7 1/16 in � 9 13/16 in) : Approx. 3.4 kg (7.5 lbs) (without batteries) : AC power cord � 1 Remote control unit � 1

Recordable

ReWritable

This unit has been designed only to play back the following CDs. � Digital audio CD � Recordable digital audio CD (CD-R) � Rewritable digital audio CD (CD-RW) When playing a CD-R or CD-RW You can play back finalized CD-R or CD-RW recorded in music CD format or in MP3 format. (If a CDRW has been recorded in a different format, erase all the data on the CD-RW completely before recording on it.) � You can play back CD-R or CD-RW like an audio CD. � Some CD-R or CD-RW may not be played back on this unit because of their disc characteristics, damage or stain on them, or if the player lens is dirty. � The reflection factor of CD-RW is lower than that of other CDs, possibly causing CD-RW to take longer time to read. Notes for MP3 files � The unit can only recognize files with �MP3� or �mp3� as the extensions, which can be in any combination of upper and lower cases. The file name needs to be up to 20 characters. � This unit recognizes files and folders on a disc in the following conditions: � up to 999 MP3 files, � up to 499 folders (including the root folder), � up to 8th layers (including the root folder). Note that the number of the folders or layers mentioned above may increase and can be played back depending on the contents recorded on the disc. � It is recommended that you record your material at a 44.1-kHz sampling rate, using the 128-kbps data transfer rate. � Some MP3 files or discs may not be played back because of their characteristics or recording conditions. � MP3 discs require a longer readout time than normal discs because of the complexity of the folder/file configuration. � MP3i and MP3 Pro are not available. � The title, artist name and album name can be displayed as the ID3 TAG (ID3v1/1.1) information. Caution for DualDisc playback The Non-DVD side of a �DualDisc� does not comply with the �Compact Disc Digital Audio� standard. Therefore, the use of Non-DVD side of a DualDisc on this product may not be recommended.

INTRO PLAYBACK
Every track or every programmed track of a CD (excluding the CD of MP3 format) can be played for the beginning ten seconds. Press INTRO on the remote control unit. The INTRO indicator appears in the display window and intro playback starts.

CARE AND MAINTENANCE
CLEANING THE EXTERIOR
� Disconnect the system from AC power before cleaning the exterior of the unit with a soft dry cloth.

Design and specifications are subject to change without notice.

HANDLING DISCS
� Remove the disc from its case by holding it at the edge while pressing the center hole lightly. � Do not touch the shiny surface of the disc, or bend the disc. � Put the disc back in its case after use to prevent warping. � Be careful not to scratch the surface of the disc when placing it back in its case. � Avoid exposure to direct sunlight, temperature extremes, and moisture.

To clean the disc � Wipe the disc with a soft cloth in a straight line from center to edge. � DO NOT use any solvent-such as conventional record cleaner, spray, thinner, or benzine-to clean the disc.