SONY RCDW222ES
Manual de Usuario

1 Press POWER. 2 Press OPEN/CLOSE of DECK B and
place a recordable CD-R or CD-RW on the disc tray. Press OPEN/CLOSE of DECK B again to close the disc tray.

High-Speed Synchro-Recording
You can easily make digital recordings from a CD to a CD-R or CD-RW, faster than normal speed Synchro-Recording. You cannot monitor the recorded signal while recording. When using the remote, set SELECT to CDR.

CD SYNCHRO HIGH N With the label side up

x

�TOC Reading� appears. The unit starts to read the TOC (Table of Contents) data and shows the type of the disc on the deck in the display.

SELECT

3 Press one of the DISC 1-5 A buttons of
DECK A and place a CD on the disc tray. Press A of DECK A again to close the disc tray.
H CD SYNCHRO HIGH x

When you perform Normal SynchroRecording (NORM SYNC), you can choose the disc which you want to record, and the play mode. When you perform Make-Disc SynchroRecording (MAKE DISC), the disc in DECK A is used to record.

1 Do Steps 1 to 3 of �Normal speed
Synchro-Recording� on page 18.

2 Press CD SYNCHRO HIGH repeatedly
to select the recording type, �NORM SYNC� or �MAKE DISC.�

4 Press CD SYNCHRO NORMAL
repeatedly to select the recording type, �NORM SYNC� or �MAKE DISC.�

DECK B stands by for recording, and DECK A stands by for playing. * * The unit stands by for recording immediately by pressing YES.

DECK B stands by for recording, and DECK A stands by for playing.* When you place a CD-R or CD-RW in the deck, the unit optimizes itself for the best possible recording and �OPC� appears on the display shortly. When �Not Blank� appears, make sure that the blank disc is placed correctly. * The unit stands by for recording immediately by pressing YES. While �OPC� appears, you cannot press YES.

3 After �New Track� appears in the
display, press N (or H on the remote) (or X) of DECK B to start recording.

Recording/Editing

High-Speed Synchro-Recording starts. DECK A and DECK B will automatically stop after recording.
To stop recording

Press x.

Playing from the beginning of the disc after recording

5 After �New Track� appears in the
display, press N (or H on the remote) (or X) of DECK B to start recording.

1 Press x again while the unit is
stopped.

Synchro-Recording starts. DECK A and DECK B will automatically stop after recording.
To stop recording

2 Press N (or H on the remote).
The unit starts playing from the first track.
Note

Press x.

When you make Synchro-Recording in programmed order, the recording speed automatically changes to Normal.

19