SHARP R884M
Manual de Usuario

R-874M/R-84STM Op Man/Ck Bk

30/3/01

9:10 am

Page 9

Website: http://www.sharp.co.uk/support

Help Line: 08705 274277 (office hours)

SETTING THE CLOCK
Your oven is fitted with a 12 hour clock. To set the time of day, follow the guidelines given in the example below: EXAMPLE: To set the time of day, 12:35: 1. Press the KITCHEN TIMER/ CLOCK SET key twice. 2. To enter the hours, by pressing the 10 MIN key once and the 1 MIN key twice. 3. To change from hours to minutes press the KITCHEN TIMER/ CLOCK SET key once.

x2

x1

x2

x1

4. To enter the minutes press the 10 MIN key 3 times then the 1 MIN key 5 times.

5. To start the clock press the KITCHEN TIMER/ CLOCK SET key once.

x3

x5

x1

NOTES: � To check the time of day during a cooking process, press KITCHEN TIMER/CLOCK SET key and the time of day will remain on the display as long as you keep your finger on the key. This does not affect the cooking process. � If the clock is set, when cooking is complete, the display will show the correct time of day. If the clock has not been set, the display will only show when cooking is complete. � If the electrical power supply to your microwave oven is interrupted, the display will intermittently show: after the power is reinstated. If this occurs during cooking, the programme will be erased. The time of day will also be erased. � When you want to reset the time of day, follow the above example again.

9