Electrical Shock Hazard Unplug power cord from receptacle before oiling the fan motor. Failure to do so could result in electrical shock. 1. Unplug power cord. 2. Remove unit from cabinet. (Follow steps under �Annual maintenance� on page 24.) 3. Oil the fan motor per instructions on the motor. To add oil, remove the oil hole plug at each end of the motor. Oil with SAE #20 nondetergent oil. 4. Replace the plugs to keep dirt from motor bearings. 5. Replace unit in cabinet. 6. Reconnect power supply.
Oil plugs
Energysaving tips
. Improve home insulation. Seal doors, windows, and close fireplace flue. l Close blinds or drapes on sunny side of house. Add window awnings. l Keep air filter clean. Do not block air flow with drapes or furniture. l Ventilate attic (high temperature levels add to normal cooling load). l Try not to use heat producing appliances during the hottest part of the day. Turn lights, radios, televisions and other appliances off when not needed. l Keep heat registers and cool air returns closed or blocked off so cooled air won�t escape. l Use a vent fan in cooking, laundry or bathing areas to pull out heat and moisture near its source.
