|
|
|
Usuarios conectados
Actualmente hay 5849 visitantes online. |
|
Productos
|
|
Información
|
|
Destacado
|
|
|
 |
|
|
No hay comentarios de productos.
HOW TO INITIALIZE THE DVD RECORDER
To put the program back at the factory-default, initialize the DVD recorder as the following procedure. 1. Turn the DVD recorder on. 2. Confirm that no disc is loaded or that the disc tray is open. To put the DVD recorder into the Version display mode, press [CM SKIP], [1], [2], and [3] buttons on the remote control in the order. Fig. a appears on the screen.
*1: "*******" differs depending on the models. *2: Firmware Version differs depending on the models, and this indication is one example.
F/W VERSION DISP
MODEL NAME : FE VERSION : BE VERSION : TT VERSION : LD ADJUSTMENT : DISC ADJUSTMENT :
*******
R30_005_082 R3F10210S1E T30015FSU OK OK
DEFAULT SETTING : ENTER EXIT : RETURN
Fig. a Version Display Mode Screen
3. Press [OK] button, then the DVD recorder starts initializing. When the initializing is completed, the DVD recorder exits the Version display mode and turns off the power automatically. * To move into the Normal mode from the Version display mode, press [RETURN] button on the remote control instead of [OK] button. When [STANDBY-ON] button is pressed before [OK] button is pressed, the DVD recorder exits the Version display mode, then the power turns off.
*
1-6-1
E7A02INT
|
|
|
> |
|
