KORG PXR4
Guía de consulta rápida

PXR4 EasyStart

Creating a two-track MP2 conversion for transfer and playback on your computer
The following exercise assumes that you already have standard media software installed on your computer, since in order for you to playback in this way,, you�ll need to convert the PXR4 data to a stereo MP2 format file. If you do not have the required software, you can download it from microsoft.com (Media Player) or apple.com (QuickTime). Playback of PXR4 transferred audio currently works with Windows 2000, Windows 98 and Mac OS 9.0. In the near future, PXR4 data will be compatible with Mac OS X. (You can also transfer a SINGLE TRACK from the PXR4 to your computer for playback WITHOUT performing the conversion...) 1. Make sure that the previous song is selected and set to play from the song beginning. 2. Hold down the [SHIFT] key, and then press the [LOCATE/BOUNCE] key until the display indicates �CONV�. 3. Press the [REC SELECT] keys for Tracks 1 and 2.

4. Adjust the playback/recording levels as needed while the song plays back. Reset to the beginning of the song again, once you are satisfied with the playback levels. 5. Begin bounce recording: Press the [REC] key and the [>] key, and when the song has finished playing back, press the [ � ] key. 6.
1. 2. 3. 4.

A new song (sharing the same title) has been created in M-Peg audio layer 2 format.

Back up your songs to a computer (pg 51):
Connect a USB cable (not included) between the PXR4 rear panel [USB] port and your computer�s USB port (PC or Mac). Press the [SYSTEM/RHYTHM] key, and then press the [�cursor] until the display indicates �USB comm�. Press the [�cursor]. When the display indicates, �Ready?� rotate the DIAL to select �YES� and press the [�cursor] once again. The display now says �CrdReady�.

On a Windows-based system, a drive named �Removable Disk� is added under �My Computer�. On a Mac-based system, a drive named �Unnamed� is added to the desktop. (Make sure to leave the folders intact whenever you backup or restore data. Do not open the folders and try to transfer files from within, as the entire folder needs to be transferred.)
5. 6.

At this point, you can launch your media player-type software and hear your song, email it, or even burn a CD from it.

To disconnect from your Windows PC, select the �Eject/Unplug� icon on the taskbar. Once you�ve selected the drive, you will be prompted: �It is safe to disconnect the USB mass storage device�. If needed, you can now unplug the USB cable. For Macintosh computers, drag the �Unnamed Drive� into the Trash, or select to highlight the drive on the desktop, and then select �Eject� from the �Special� menu. Once the PXR4 display changes from �CardLock� to �CdNotRdy� press the [�cursor]. The display indicates �Complete� and �NO� is flashing. Dial in �YES� and press the [�cursor]. The display will return to Locate Mode, and if needed, you may now unplug the USB cable.

Remember- there is much more to discover about your PXR4 in the detailed and informative Owner�s Manual that came with your unit!

5