Other Effect Settings
You can select from among four reverb effects and four chorus effects by pressing the keyboard keys shown below.
1 Reverb Effect Keys 1: Room 2 3: Hall 2
Layering Two Tones
Use the following procedure to layer to two tones, so they sound at the same time.
PREPARATION
� If you plan to use a variation tone, perform the procedure on page E-6 to select the variation tone for the applicable TONE button(s) before starting this procedure.
0: Room 1
2: Hall 1
1
L C1 L C2 L C3 L C4 L C5 L C6 L C7 L C8 2 Chorus Effect Keys 1: Chorus 2 3: Chorus 4
While holding down the TONE button of one of the tones you want to use (the base tone), press the TONE button of the other tone (the layered tone).
Example: Press GRAND PIANO 2 button and STRINGS button at the same time.
0: Chorus 1
2: Chorus 3
1
While holding down the CONTROL button, press one of the keyboard keys shown above.
� This causes the indicator lamp of the base tone to light, and the layered tone to flash. � If the base tone (the one you pressed first) is a variation tone, the indicator lamp above the VARIATION button will light.
GRAND PIANO 2 STRINGS
� The tones are now layered.
2
After you are finished using the layered tones, press one of the TONE buttons again to unlayer them.
NOTE
� Note that you cannot layer the main tone and variation tone assigned to the same TONE button.
