Playback Mode
Playing Back a Tape
The recorded scene can be played back immediately after the recording. 1 Set the [OFF/ON] Switch (48) to [ON]. �The [POWER] Lamp (46) lights up.
O
ª Adjusting the Sound Volume
To adjust the volume, push the [`VOL/JOG_] Lever (51) to display the [VOLUME] Indication. Push the [`VOL/JOG_] Lever towards [T] to increase the volume or push the [`VOL/JOG_] Lever towards [W] to decrease the volume. The [VOLUME] Indication goes off after the adjustment is finished.
VOL/JOG
C P
(46)
POWER
ON
FF
W
T
(48)
(51)
2 Set the Mode Dial (44) to Tape Playback
Mode.
(44)
SD
To adjust the volume with the Remote Controller, press the [T] or [W] Button to display the [VOLUME] Indication. Press the [T] Button to increase the volume or press the [W] Button to decrease the volume. The [VOLUME] Indication goes off after the adjustment is finished.
3 Press the [6] Button (21) to rewind the
tape.
STILL
�The sound volume cannot be adjusted using the Remote Controller in Playback Zoom Mode. (-46-) �For other notes concerning this item, see -79-.
(21)
ENTER
FADE
�Rewind the tape to the point where you want to start playback. �When the tape reaches the beginning, rewinding stops automatically. 4 Press the [1] Button (19) to start playback. �The [!] Indication appears.
STILL
Finding a Scene You Want to Play Back
ª Cue/Review Playback
STILL
(19)
ENTER
ENTER
FADE FADE
(21)
(18)
�If a cassette recorded with a copyright protection signal is played back, the picture is distorted by mosaic-like patterns.
If the [5] Button (18) or [6] Button (21) is pressed during Playback, it turns to Cue Playback A or Review Playback B.
To Stop Playback Press the [�] Button (20).
STILL
ENTER
A
B
(20)
FADE
�If the Button is held continuously, it turns to Cue Playback or Review Playback until you release it.
