REMOVAL OF THE LIGHT IN POLARIZER UNITS
1. Remove the LCD Drive P.C.B. Refer to Steps 1 ~ 6 in "REMOVAL OF THE LCD DRIVE P.C.B." 2. Remove the 3 Joint Piece Units. 3. Remove the Light IN Polarizer Red, Green, Blue Unit by removing the 3 Screws (423). Note: 1. Use extreme caution not to damage the Light IN Polarizer Units (Red, Green, Blue), when servicing. 2. Clean the Light IN Polarizer Units if necessary. Refer to "Cleaning Methods" in Maintenance.
Joint Piece Unit Joint Piece Unit
423
423
Light IN Polarizer Blue Unit
Light IN Polarizer Red Unit
Joint Piece Unit
423
Light IN Polarizer Green Unit
Fig. P2-1 Reassembly Note for the Light IN Polarizer Unit (Red, Green, Blue): 1) After replacing the Light IN Polarizer Units, be sure to perform Polarizer Adjustment. 2) Make sure of the mark color to distinguish the Light IN Polarizer Units (Polarizer).
Light IN Polarizer Units
Mark
Red Mark: Green Mark: Blue Mark: Light IN Polarizer Red Unit Light IN Polarizer Green Unit Light IN Polarizer Blue Unit
