PIONEER PRO-910HD
Manual de Usuario

Preparation
Installing the Media Receiver vertically
You can use the accompanying stand to install the Media Receiver vertically.

07
You can remove the shock absorbing pads.

Installing the Media Receiver vertically
Insert the vertical installation stand into the side of the Media Receiver.
Shock absorbing pad

Right side

Keep the shock absorbing pads and screws. They are required when you place the Media Receiver in the horizontal position.

Secure the vertical installation stand with screws.
Vertical installation stand screws

Plug the screw holes using the caps provided.

Remove the separation sheet.

Align with the hole and attach.

Screw hole cap

� When you have installed the Media Receiver vertically, always use the accompanying stand. If you place the unit directly on the floor the cooling vents will be blocked which will result in mechanical failure.

19
En

PDP-ELITE-Eng (17-27)

19

9/9/03, 11:44