Inicio >>
PIONEER >>
PRO-700HD/KUXC/CA Manual de Servicio
0 artículo(s) en Su carrito
Opiniones de los clientes
No hay comentarios de productos.
TEXT_PDF_SNIPPET
PRO-700HD
¶ Vertical correction adjustment of the green line
� Select the Adjustment item
GV - SUB PIN
1
CH
� Adjust the Data value
2 5 8 0 3 6 9
VOL
or
4 7
or
In particular, be aware of the setting before adjustment.
Note : � Repeat the adjustments until you attain the optimum state. � Fine-adjust over the entire picture to obtain the optimum picture. � If the adjustment of V-STATIC is not possible within the range of 010 to �010, set the data value to 0, turn the centering magnet of the deflection yoke and fine-adjust V-STATIC. Adjustment Method
u i a s d f g h j k l /
Note: Do not adjust items 2, 4, 8 and 12. � Adjust so that the green horizontal lines at the top and bottom of the screen become straight with no distortion.
�
�
�
�
GV-4DS PIN � (GV-M 4S PIN) *2
*2 : Adjust taking note of the green horizontal lines at 1/4 of the left and right sides of the screen.
7 Screen
� KEY
15
� MID KEY
16
� 3D KEY
17
� M 3D KEY
18
Key No.
¶Screen�s changes in the ver tical direction when manual convergence adjustment is mode The changes at the arrow parts shown below are those implemented using the Volume ª key. Changes are opposite to the arrow when the Volume · key is used.
4
� SUB KEY
19
� M S KEY
20
� 3DS KEY
21
� M 3S KEY
22
Key No.
3
� PIN
23
� MID PIN
24
� 4D PIN
25
� M 4D PIN
26
Key No.
6
Key No.
� SUB PIN
27
� M S PIN
28
� 4DS PIN
29
� M 4S PIN
30
5
= Fixed position Fig. 4. Vartical correction (2)