LINE6 POD
Manual de Usuario

CREATING & STORING SOUNDS:

MEMORY RESET

Activating Customization Mode
The �rst thing to do is get an Amp or Effect setting that you really like and want to store to the Amp Models or Effects knob. This amp or effect setting can come from a factory preset, one of your own edits, a sound you downloaded off the web, or a sound you�ve tweaked up in SoundDiver. Whatever its source, all you have to do is get that sound into your POD so it�s active and you�re playing though it. With that done, you�ll hold (and keep holding) the Save button, then press the Manual button. The Save, Manual, A and B lights will all start a-�ashing (and you can let go of those buttons now). You have entered the Customization Mode. If you use the Up/Down buttons to select A now, you will instruct your POD that you want to save your present Amp settings to live on the Amp Models knob. If you select B, your POD will understand that you want to save your current effects setting to the Effects knob. Got it? Here are the steps in handy list form:

6�7

1. Get an amp or effect you love happening on your POD. 2. Hold Save, and press Manual. Save, Manual, A, and B lights �ash. 3. Use Up/Down arrows to select A (Amps) or B (Effects). 4. Press Save to complete the deed.

MEMORY RESET
If, for any reason, or just for the sheer mad joy of it, you decide you need to reset your POD�s memory to its factory-programmed state, hold down the Up and Down buttons as you turn on the power. That�ll blow your POD�s memory and reset it just like it was when it left the Line 6 factory.

Warning: This will erase ALL the channels, as well as the custom amp and effect
settings you might have created. So be sure and ask yourself �Do I really want to do this?� If the answer is yes, go on ahead with your bad self.