(1) Input resistance selector for left channel
Select the position suited to the cartridge DC resistance. Before changing the selector, you should ensure that the volume control of the pre-amplifier is turned to a minimum or the AC power for the audio system is turned off.
prevent any "HUM" from interfering with the music signal.
(6) Input RCA plug for left channel
This input should be connected to the tonearm output RCA plug for left channel.
(2) Power Indicator
The DV logo lights up when the PHA-200 is on and eceiving AC power.
(7) Output RCA plug for right channel
This output should be connected to the "MM 47K ohms" phono input of the pre-amplifier or the input of a "MM" phono stage for right channel. You should not connect them to the "MC" phono input.
(3) Input resistance selector for right channel
Select the position suited to the cartridge DC resistance. Before changing the selector, you should ensure that the volume control of the pre-amplifier is turned to a minimum or the AC power for the audio system is turned off.
(8) AC power cable
This cable should be connected to the AC power socket (11) of the power supply unit.
(4) Input RCA plug for right channel
This input should be connected to the tonearm output RCA plug for right channel.
(9) Output RCA plug for left channel
This output should be connected to the "MM 47K ohms" phono input of the pre-amplifier or the input of a "MM" phono stage for left channel. You should not connect them to the "MC" phono input.
(5) Ground post
Ground wires for either the tonearm and/or the turntable should be connected to the ground post of the PHA-200 to 2
