Adjusting the Digitizer
You need to adjust the digitizer when you performed a hard reset, when the tapping operation or scrolling does not work properly, or when you cannot adjust the brightness of the back light or screen contrast.
1
Tap the arrow V in the upper right corner of the Preferences screen and select Digitizer.
The Digitizer calibration screen is displayed.
This Digitizer calibration screen is exactly the same as the screen displayed for the first time you turn on your CLI� handheld. Follow the on-screen instructions to adjust the digitizer. Tip
Use the stylus perpendicular to the screen to tap targets.
Customizing your Sony CLI�� handheld (Preferences)