No hay comentarios de productos.
4-667-427-13(1)
Removing the Game Controller
1 Tap the [GameCon] icon on the Home screen.
The Game Controller�s General settings screen appears.
Before use
This Game Controller is adaptable only for Sony CLI� handheld.
1
Remove the Game Controller while pressing the center portion on the connector of the Game Controller, as shown.
2 Tap V in the upper right corner of the General
settings screen, and select [Keys 1] or [Keys 2] screen.
The key assignment settings screen appears. * You can reassign the [Keys 2] buttons only when you play games that support the extended buttons.
Game Controller
Operating Instructions Mode d�emploi
Installing the software
Before using the Game Controller, install a driver for Game Controller from the supplied installation CD-ROM on your CLI� handheld. For installation, you need a Microsoft® Windows® compatible computer on which the Palm Desktop software that is suitable for your CLI� handheld has been installed. Connect the PC to your CLI� handheld, and make sure that HotSync works on both the PC and CLI� handheld.
3 Tap V to the right of each button, and change
the assignment.
1 Insert the supplied installation CD-ROM into
the CD-ROM drive of your PC.
The initial installation screen appears.
2
2 Click [English].
The installer screen appears.
Remove the drop-prevention strap by pressing the retaining points on both sides.
PEGA-GC10
Sony Corporation © 2002 Printed in Japan
3 Click [Install Game Controller software].
The installer submenu appears.
z Be sure to attach the drop-prevention strap when you use the Game Controller.
The CLI� handheld and Game Controller are easily detachable. To prevent injury or damage, be sure to use the strap.
4 Install the software, following the
instructions shown on the screen.
If you have registered more than one user, select a user name from the user list.
English
5 Click [Done]. 6 Perform a HotSync® operation on your CLI�
handheld.
A HotSync operation starts and the software is transmitted from your Windows® compatible computer to CLI� handheld.
Using the Game Controller
1 Press the POWER button on the CLI� handheld
to turn the power on.
Installing the supplied game software
Install the game application from the supplied installation CD-ROM on your CLI� handheld, following the procedure below. For details on how to play the game, refer to the directions included in the installation CD-ROM.
WARNING
To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Owner�s Record The model and lot numbers are located on the bottom of your Game Controller. Record the lot number in the space provided below. Refer to the model and lot numbers when you call your Sony dealer regarding this product. Model No. PEGA-GC10 Lot No. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including any interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be encouraged to try to correct the interference by one or more of the following measures: � Reorient or relocate the receiving antenna. � Increase the separation between the equipment and the receiver. � Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. � Consult the dealer or an experienced radio/TV technician for help. If you have a question about this product, call the Sony Customer Information Center at keep on next line 1-877-7607669; or write to the Sony Customer Information Center at 12451 Gateway Boulevard, Fort Myers, FL 33913. The number below is for FCC-related matters only. Declaration of Conformity Trade Name: SONY Model No.: PEGA-GC10 Responsible Party: Sony Electronics Inc. Address: 680 Kinderkamack Road, Oradell, NJ 07649 USA Telephone No.: 201-930-6972 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The supplied interface cable must be used with the equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. For customers in the European Countries This device complies with the following European Directives: 89/336/EEC, 92/31/EEC (EMC Directives) 93/68/EEC (CE Marking Directive) This product complies with EN 55022 Class B and EN 55024 for use in the following areas: residential, commercial and light industrial. For customers in Canada This Class B digital apparatus complies with Canadian ICES-003. � CLI� and Jog Dial are trademarks of Sony Corporation. � All other trademarks are trademarks of their respective owners.
2 Tap the [GameCon] icon on the Home screen.
The Game Controller�s General settings screen appears.
Extending the cord
Detaching the cover on the back of the Game Controller lengthens the cord by about 1 3/16 in. (30 mm).
3 Tap the check box of [Enable Game Controller]
to tick the item on the General settings screen.
1 Insert the supplied installation CD-ROM into
the CD-ROM drive of your PC.
The initial installation screen appears.
2 Click [English].
1
Detach the cover on the back of the Game Controller and extend the cord as shown.
Detach the cover.
The installer screen appears.
3 Click [Install Game].
The installer submenu appears.
4 Install the software, following the instructions
shown on the screen.
If you have registered more than one user, select a user name from the user list.
Extend the code.
The Game Controller is ready to use now.
5 Click [Done]. 6 Perform a HotSync® operation on your CLI�
handheld.
A HotSync operation starts and the software is transmitted from your Windows® PC to your CLI� handheld. For customers in USA and Canada Tip
In addition to this game application you have just installed in the above procedure, the supplied installation CD-ROM includes the trial versions of some other game applications. You can try them by installing them on your CLI� handheld as follows. 1 Insert the supplied installation CD-ROM into the CD-ROM drive of your PC. 2 Copy the file of the game you want to try on your PC from [¥3rdparty¥Games] in the CD-ROM. 3 Install the game application on your CLI� handheld, following the instructions for your CLI� handheld.
2
Put the cover back in its place.
When you do not use the Game Controller temporarily
Tap the check box of [Enable Game Controller] to remove the tick on the General settings screen.
Setting the Key Emulation
Tap the check box of [Enable Key Emulation] to tick the item on the General settings screen. This allows the applications that are assigned to each button of this unit to start. Note
If the game does not work correctly, tap the check box of [Enable Key Emulation] to remove the checkmark on the item and see if the game works correctly.
determined by turning the equipment off and on, the user is
Attaching the Game Controller to your CLI� handheld
1 Attach the Game Controller to the CLI�
handheld, as if to put it onto the CLI� handheld, as shown.
Press down firmly.
Carrying your CLI� handheld with the Game Controller attached
Slide the HOLD switch to the right to set the HOLD function on the Game Controller. The Game Controller does not accept any key operations and prevents inadvertent operation.
Note
For details on the supplied game applications, contact the manufacturer of each game application.
Specifications
The grafitti area should be covered by the Game Controller.
Input Power consumption
When you have a Flip&Rotate style CLI� handheld
Attach the Game Controller by sliding it alongside your CLI� handheld, as shown. Note
The Game Controller cannot be attached to the Flip&Rotate style CLI� handheld when it is set to the opened style. To use the Game Controller with a Flip&Rotate style CLI� handheld, set the CLI� handheld to the turned style.
HOLD OFF
HOLD ON
When you use the Game Controller again, slide the HOLD switch to the left to cancel the HOLD function. Note
When you do not use the Game Controller, remove it from the CLI� handheld.
DC 3V 7.5 mW (during normal operation) 0.24 mW (with HOLD function set) Operating temperature 41 �F to 95 �F (5 �C to 35 �C) Dimensions 3 5/8 � 29/32 � 1 11/16 inches (89 � 22.5 � 42.5 mm) (w/h/d) (Excluding the largest projecting part) Mass. Approx. 1.23 oz (35 g) Cord length Approx. 2 3/8 inches (60 mm) (1 3/16 inches (30 mm) at the factory settings) Accessories Installation CD-ROM Case Strap
Location of controls
X key HOME key MENU key Y key
Design and specifications are subject to change without notice.
Notes on use
2 Hook up the connector of the Game
Controller to the interface connector of the CLI� handheld.
� Do not subject the unit to: � Extreme heat or cold � Dust, dirt, or sand � High humidity � Vibration � Strong magnetic fields � Mechanical shock � Direct sunlight (for extended periods of time) � Do not drop the unit. � Be sure that nothing metallic comes into contact with the metal parts of this unit. If this happens, a short circuit may occur and the unit may be damaged. � Do not operate the unit if it has a damaged cord or if it has been dropped or damaged. � Always keep the metal contacts clean. � Do not disassemble or convert the unit. � While the unit is in use, it gets warm. This is normal. Cleaning Clean the unit with a soft, dry cloth or a soft cloth lightly moistened with a mild detergent solution. Do not use any type of solvent, such as alcohol or benzine, which may damage the finish.
Interface connector f/F/g/G keys HOLD switch A key B key
* The functions of the keys may vary depending on games.
3 Attach the drop-prevention strap to the Game
Controller and CLI� handheld.
Changing the key assignment
According to the game you play, you can assign the functions of the buttons and Jog DialTM navigator of your CLI� handheld to the keys of the Game Controller. At the factory default presetting, the functions are assigned as follows. f key: Up button
To detach, press the retaining points on both sides.
F key: Down button g key: Date Book button G key: Address Book button A key: To Do List button B key: Memo Pad button X/Y + f key: Rotates the Jog Dial navigator upward. X/Y + F key: Rotates the Jog Dial navigator downward. X/Y + g key: Presses the Back button. X/Y + G key: Presses the Jog Dial navigator.
Printed on 100% recycled paper using VOC (Volatile Organic Compound)free vegetable oil based ink.
