Inicio >>
PIONEER >>
PDR-W739/NVXJ Manual de Usuario
0 artículo(s) en Su carrito
Opiniones de los clientes
No hay comentarios de productos.
TEXT_PDF_SNIPPET
9 Additional Information
Troubleshooting
Power does not come on
� Check that the unit is plugged into a standard AC power outlet. � If the unit is connected to another component�s power output, check that the other component is switched on.
Some tracks are skipped without being played
� The disc loaded contains skip IDs � pages 23�24.
A recorded CD-R disc won�t play on other CD players
� Check that the disc has been finalized � page 20. � Most ordinary CD players will not play CD-RW discs.
No sound when playing a disc
� Check that all connections to the amplifier are correct and that all interconnects are firmly connected.
Can�t record
� Check that all connections to the amplifier and any other components are correct and that all interconnects are firmly connected. � Check that the disc you�re trying to record onto hasn�t already been finalized. If it has, use another disc, or erase the TOC (CD-RW only) � page 22. � Check that you�ve selected the correct input. Use the INPUT button to switch inputs. � Check that the recording level is not set too low � pages 33� 34.
Recorded sound is distorted
� Check that all connections to the amplifier and any other components are correct and that all interconnects are firmly connected. � There may be interference from a nearby TV. Switch the TV off during recording, or move the unit further away. � Check that the recording level is not set too high. Use the fixed/automatic level function if you�re unsure � pages 32� 33. � Some analog sources output a very high level signal that may distort the recording. In this case, turn down the recording level � page 33. � Check that the disc is not warped, damaged or dirty � page 36
Can�t operate using the remote control
� Check that the batteries in the remote are not exhausted. � Check that there are no obstacles between the remote and the remote sensor. � Check that no bright lights (including sunlight) are shining onto the remote control sensor on the main unit. � Check that you�re operating the remote within its operating range � page 11.
