PIONEER PDP-S36
Manual de Usuario

English

CONNECTION TO A PLASMA DISPLAY
CONNECTING THE SPEAKERS
1 2 3 4 Pass the speaker cables through the hole in the speaker mounting bracket. Connect the speaker cables to the speaker. Press the speaker cables into the groove of the bracket. Connect the speaker cables to the display.
Speaker Terminal

2
Speaker Cable

1

3

Connecting your Speaker Cables (to the display)
Groove Connect the cables correctly with respect to the polarity of the Plasma Display and the speaker terminals, that is, ª cable to ª terminals and · cable to · terminals. To do so, connect the cable with the gray line to the ª terminals and the white cable to the · terminals. Gray Line White White Gray Line (black) (red) Gray Line

Connecting your Speaker Cables (to the speaker)

White Push the lever, insert the end of the speaker cable into the hole, and release the lever. Pay attention to the polarity of the speaker terminals when making connections. (The gray line represents the ª terminal)

÷ Press the lever and insert the end of the cable. ÷ When you release the lever, it clamps onto the speaker cable.

SYSTEM CABLE

WHITE

BLACK

Warning If you insert the speaker cable too far so that the insulation is touching the speaker terminal, you may not get any sound.

4

5

English