Inicio >>
PIONEER >>
PDP-507XG/DLFR Manual de Usuario
0 artículo(s) en Su carrito
Opiniones de los clientes
No hay comentarios de productos.
TEXT_PDF_SNIPPET
02
Safety precautions
Installation precautions
Observe the following precautions when installing with any items such as the optional stand.
Side view
Mounting surface
Mounting bracket (or equivalent) Plasma display
When using the optional stand, brackets, or equivalent items
Ask your dealer to perform the installation. Be sure to use the supplied bolts. For details, see the instruction manual that comes with the optional stand (or equivalent items).
M8 screw 12 mm to 18 mm
When using other items
Consult your dealer. The following six mounting holes can be used for the installation:
Rear (PDP-507XG)
Caution � Be sure to use four or more mounting holes symmetrical to the vertical and horizontal median lines. � Use M8 screws, which go 12 mm to 18 mm in depth from the mounting surface of the plasma display. See the side view above. � Be careful not to block the ventilation opening at the rear of the plasma display. � Be sure to install the plasma display on a flat surface because it contains glass. � The screw holes other than the above are to be used only for the specified products. Never use them for mounting nonspecified products. Note � It is strongly recommended to use the optional Pioneer mounting products.
Mounting holes
Mounting holes
Median line
Median line
Rear (PDP-427XG)
Mounting holes
Mounting holes
Median line
� Pioneer shall not be liable for any personal injury or product damage that results from the use of mounting items other than the optional Pioneer products.
