PIONEER PDP502MX/MXE
Manual de Servicio

PDP-502MX, PDP-502MXE

Procedure

Adjusting Item
Base Pulse

Input signal
Any input

Adjusting Point
SUB VIDEO mode in Factory mode PULSE NUMBER ........."8" Key

Adjusting Method
Set to the indicated value with the keys on the remote control unit. (refer to SUB VIDEO mode)

11

number Adjustment (502MX only)

Note) If unnecessarily adjusted, power consumption is changed and the panel is damaged. Adjust only in case of necessity. SUB VIDEO mode Set to the indicated value with the keys on the remote control unit.

12

ABL Level Value Adjustment (502MX only)

Any input

in Factory mode (refer to SUB VIDEO mode) ABL LEVEL ...."9" Key

Note) If unnecessarily adjusted, power consumption is changed and the panel is damaged. Adjust only in case of necessity. REFERENCE 1 in Factory mode ABL LEV OFFSET ........."BS9" Key Adjust to the ABL value mentioned on the "Drive voltage label" at the chassis of the glass panel.

Any input

13

ABL Level Offset adjustment

Note) If unnecessarily adjusted, power consumption is changed and the panel is damaged. Adjust only in case of necessity. REFERENCE 1 in Factory mode PLS NUM OFFSET ........."BS11" Key Note) If unnecessarily adjusted, power consumption is changed and the panel is damaged. Adjust only in case of necessity. Set to the indicated value with the keys on the remote control unit. (refer to REFERENCE 1 mode)

Any input

14

Pulse Number Offset adjustment

Adjusting points and Measuring points 54