PIONEER PDP-42H1AN
Manual de Usuario

BASIC OPERATION

WHEN USE MULTIPLE MONITORS
When you use multiple Plasma Monitors, you can use POWER ON button and POWER OFF button on Remote Control Unit instead of the POWER ON-OFF button. Press POWER ON button to turn Plasma Monitor ON so as not to affect another Plasma Monitor which may be already turned ON.
F OK STATUS

MOVE DOWN MENU
POWER ON

POWER ON button POWER OFF button

Press POWER OFF button to turn Plasma Monitor OFF (standby mode) so as not to affect another Plasma Monitor which may be already turned OFF (standby mode) .

OFF

OFF TIMER
The OFF TIMER can be set to turn the power off after 30, 60, 90 or 120 minutes.

Pressing the OFF TIMER button on the Remote Control Unit until desired time is displayed.

INPUT VIDEO COMPONENT ON-OFF

OFF TIMER button

PC/RGB

VOLUME

Off timer 30

30

60

90

120

0

WIDE

OFF TIMER

PICTURE

MOVE UP

MUTE

When remaining time reaches zero, "Off timer 0" appears for 10 seconds, then Plasma Monitor turns to OFF (standby mode).

TO CHECK THE REMAINING TIME:
To check the remaining time of OFF TIMER set, press OFF TIMER button once. The remaining time displayed for few seconds. When you select input signal, the remaining time is displayed below the input mode.

Off timer 58

AV1 58

TO CANCEL THE OFF TIMER:
Pressing the OFF TIMER button until the time "0" is displayed.

Off timer 0

21