PIONEER PD-F1009/KU/CA
Manual de Usuario

HOW TO LOAD THE DISCS (Be sure to read this before operation)
Loading discs into the rack
� You can load up to 300 discs in the rack. The numbers marked on the rack are used as the disc numbers. These are marked in a clockwise order from 1 to 300. � The following procedure describes how to load discs from disc No. 1.

7
OPEN/ CLOSE

Press OPEN/CLOSE.
The hood will close. When the hood closes, the rack is revolved once for disc detection (disc loaded/not loaded detection function).

1

STANDBY

Press STANDBY/ON.

STANDBY/ON

2

1 4

2 5

3 6

DISPLAY

7
DISC

8 0

9
TRACK

Ensure that the disc No. shown on the display is "1".
If disc number "1" is not displayed, press digit button 1 .

Tip: Difference between OPEN/CLOSE and UNLOAD OPEN/CLOSE: The hood is simply opened or closed. UNLOAD: The slot corresponding to the disc No. being displayed rotates to the center position then the hood is opened. Notes!! � Do not attempt to open the hood with your hand. � Be careful not to pinch your fingers when opening and closing the hood. � If PLAY operation (PLAY, BEST, Hi-LITE, PREVIOUS) is carried out before disc detection finishes, PLAY operation will proceeded to without detection. In this case, detection will operate after PLAY is finished. Detection may not function properly depending on the color or shape etc., of the disc.

(Carry out step 3 within 5 seconds.)

WARNING:
Do not put your hand or any other object inside the rack, otherwise injury or part damage may result.
SEC

3
UNLOAD

Press UNLOAD.
«
DISC TRACK MIN

CDFILE
301� DISC

The hood will open. When UNLOAD is pressed, the hood opens to the disc corresponding to the disc No. displayed on the front of the unit.

4

Load the disc into the rack with the label side (printed surface) facing to the right.
Label side faces right. (Side to be played faces left.)

� While changing or inserting discs, be careful not to press any buttons on the main unit or the remote control. The rack may move suddenly, and then your fingers may be caught between discs and the side of door. � When changing or inserting discs, make sure the rack is stopped. Do not attempt to put a disc in when the rack is moving. Do not put anything other than CDs inside the rack. Load only one disc into each disc slot. Do not apply force to the rack. This can cause a malfunction. 8-cm (3-in.) discs cannot be played as they are. First attach the 8-cm (3-in.) disc adapter to each 8-cm (3-in.) disc and load them together in the player. � Never start playback by placing the 8-cm (3-in.) disc adapter alone, without attaching it to a disc. � The unit will not operate if the hood is opened during playback. Be sure to close the hood before attempting any operation. � To load or remove a disc in or from the slot which is seen through the hood, press OPEN/CLOSE. The hood is opened, �HOLD� is displayed and the disc can be loaded in or ejected from the slot seen through the hood. Even while �HOLD� is being displayed, the rack can be rotated by pressing DISC (�/+). BEFORE BASIC VARIOUS OPERATING OPERATIONS

� � � �

Note!! � Inserting more than one disc into the slot will damage the discs and cause the unit to malfunction.

5

DISC

PUSH ENTER

Turn the jog dial clockwise to rotate the rack.
When the jog dial is turned clockwise, the rack turns in the direction in which the disc number increases (1, 2, 3 ...). When turned counterclockwise, the rack turns in the opposite direction.

To remove the discs...
1 Press UNLOAD. 2 Select the number of the disc you want to unload

6

Load other discs into the rack by repeating steps 4 and 5 for each of them.

by turning the jog dial or pressing DISC (�/+) on the remote control unit.
� The rack rotates until the selected disc comes to the front of the unit.

3 Remove from the rack. 4 Press OPEN/CLOSE. � The hood will close.

9