SONY PCWA-A500
Guía de consulta rápida

4-660-142-11(1)

Applications
Accessing the Internet from various places in the house
By using a computer with a Wireless LAN PC Card, you can communicate with the Access Point and share files with other computers via the Access Point. Furthermore, if you connect the Access Point to a DSL modem, cable modem, or ISDN router, you can access the Internet from various places in the house.

Step 1
Set up the Access Point and connect power
Locating
The Access Point stand is hinged, so it can be lowered or raised. It serves as a normal stand when lowered or as a wall-mount adapter when raised. Stand lowered (standing) Stand raised (for wall-mounting)

Fastening the Access Point to a wall with screws:

Body diameter: 0.14 to 0.29 inches (3.5 to 7.5 mm) Length: 1.2 inches or more (30 mm or more)

2.82 inches (71.5 mm)

5GHz Wireless LAN Access Point

PCWA-A500 Quick Start Guide
This guide provides an overview of the functions of the 5GHz Wireless LAN Access Point PCWA-A500 and the necessary preparations before use. Please read first.

POWER

MESSAGE

WIRELESS

NETWOR K1

NETWOR

K2

NETWORK 1

Wall-mounting Holes
NETWORK 1 NETWORK 2

NETWORK 2

DC IN 10V

DC IN 10V

Using in the normal standing position
z Hint
This guide describes installation procedures for connecting the Access Point to a DSL modem, cable modem, or ISDN router. Please refer to the Operating Instructions for the Ethernet connection procedure.

Notes
� Using two screws or other fasteners, ensure that the Access Point is securely set on the wall. When fastening the Access Point to a wall with screws, retighten them after mounting the Access Point. � Select a location that will hold the weight of the Access Point when mounting it on the wall. If the location cannot hold the weight of the Access Point, the Access Point may drop and cause an accident. � When mounting the Access Point on walls made of plasterboard or other fragile material, make sure that the material is strong enough to support the unit's weight and use special screw fasteners or other fixtures that are made for use with that material. If the unit is fastened with ordinary screws, there is a danger that it may fall. � When mounting the Access Point on the wall, be careful not to drop the Access Point or the tools used for doing the work. Dropping the unit or tools could result in unforeseeable accidents.

The stand supports the Access Point on a horizontal surface. For optimum performance, use the stand to keep the front face of the Access Point vertical during operation. Installation Notes
� Install the Access Point on a stable surface. � Do not install it on a shelf or other place where jarring or vibration might cause it to fall. � Do not install the Access Point in any location where passers-by might accidentally come in contact with the Access Point or its cabling.

Installation and setup procedure
Using the stand as a wall-mount adapter
Step 1
Set up the Access Point and connect power.
When mounting the Access Point on a wall, the size and spacing of mounting holes is as follows. Note that no brackets are provided for mounting the Access Point on a wall. Use screws or nails that meet the following requirements. Hanging the Access Point from screws set in a wall:

Connecting power

1

Connect power to the Access Point as shown below.
The following illustrations show the normal standing position. Power Outlet DC IN 10V
POWER
MESSAGE

PCWA-A500
Step 2 (Described in Wireless LAN PC Card Quick Start Guide)
Sony Corporation ©2002 Printed in Japan

Head diameter: 0.24 to 0.29 inches (6.0 to 7.5 mm) Body diameter: 0.14 to 0.15 inches (3.5 to 4.0 mm)

Insert the Wireless LAN PC Card into the computer, and install the Wireless LAN PC Card driver. This process is described in the Wireless LAN PC Card Quick Start Guide that comes with your Wireless LAN PC Card.
This guide for the 5GHz Wireless LAN Access Point PCWA-A500 is intended to be read together with the manuals provided with the 5GHz Wireless LAN PC Card PCWA-C500 (sold separately).

Length: 1.2 inches or more (30 mm or more)

WIRELESS

NETWORK 1

NETWORK 2

2.82 inches (71.5 mm)

Step 3 (Described in Wireless LAN PC Card Quick Start Guide)
Install the Wireless Panel software supplied with the Wireless LAN PC Card.
AC Adapter

Unpacking
While unpacking the product, confirm that the following items are present. � Access Point � AC adapter

Step 4 (Described in Wireless LAN PC Card Quick Start Guide)
Configure the appropriate computer communications settings. z Hint
Select Access Point Connection Mode.

2

Fit the ferrite core (thick cylindrical part) of the AC Adapter cable into the recess on the back of the Access Point, and insert the cable in the cable securing groove.

NETWORK 1

POWER

Step 5
MESSAGE
WIRELESS

NETWORK 2

DC IN 10V

NETWORK 1

Configure the appropriate communications and Internet connection settings for the Access Point.

NETWORK 2

Step 6 (Described in Wireless LAN PC Card Quick Start Guide)
Configure the computer communications settings to match the settings configured in Step 5.
� Ethernet cable (straight-through wiring) � Power cord

z Hint
There is no power switch on the Access Point.

Step 7
Connect the Access Point to the DSL modem, cable modem, or ISDN router.
� Operating Instructions � Quick Start Guide (this sheet) � Warranty card � Other printed materials

Continued on next page