Depending on the virtual memory setting or network-related settings, noise may occur. Please make the following settings before use. � In Chooser of the Apple menu, set AppleTalk to �Inactive.�(This setting is not changed as a result of turning off AppleTalk, as requested by OMS when sequencer software is started up. You must change the setting yourself using the �Chooser.�) In the �Memory� Control Panel, set Virtual Memory to �Off.� Depending on the way in which you connect to the Internet, use the PCR-1 with the following settings. If you connect to the Internet via a LAN cable Use while the LAN cable is connected. If you connect to the Internet via the internal modem port, or are not connected to the Internet In the �TCP/IP� Control Panel, set �Connect via� to �PPP.� After you have made the settings, restart your Macintosh.
� �
* Do not use software that accesses the network (such as a Web browser) at the same time that you are using sequencer software or audio editing software.
fig.ASIO-04
Try increasing the Buffer Size in the ASIO Driver control panel. The name of the settings dialog box will differ depending on your software. * If you change the buffer size, you must exit the software and then restart it. * Roland can make no guarantee of, nor provide support regarding the operation of sequencer software and audio editing software made by another manufacturer. Please contact the manufacturer of the software you are using.
