Using the Floppy Disk Drive
You can connect the floppy disk drive to the computer. (USB) connector on your
To connect the floppy disk drive
� You do not need to shut down the computer before connecting or disconnecting the
�
floppy disk drive. Before removing the FDD, see �To remove the floppy disk drive when the computer is on� .
Plug the USB cable from the floppy disk drive into the (USB) connector on the computer. The VAIO logo on the disk drive should be facing up.
Connecting the FDD
Floppy disk drive (supplied)
USB connector Attached USB cable
� To use two USB devices at the same time, plug the second device into the
(original mini USBconnector) on the left side of the computer, using the supplied conversion adapter. To boot your computer from a floppy disk you must connect the floppy disk drive to the USB port on right side of the computer as shown above.
