|
|
|
Usuarios conectados
Actualmente hay 6011 visitantes y
6 usuarios online. |
|
Productos
|
|
Información
|
|
Destacado
|
|
|
 |
|
|
No hay comentarios de productos.
notebook Connecting the camera to a desktop computer
1
cable to the USB connector on your notebook. Attach camera to the mounting adapter. � Holding plate, pull out rear arm as shown in the illustration Holding plate, pull out rear arm as shown in the illustration below, and attach camera to the mounting adapter. Make sure you below, and hang camera on top of the display panel. place the mounting adapter on an level, stable surface.
Arm
Mount camera onto your notebook, and connect the camera�s USB
� When using an NV Series VAIO computer, use the mounting adapter.
Arm plate Arm
Arm plate
Mounting adapter
Arm plate
Arm
1-2. Connecting the Camera
z Hint
You can also attach camera using the supplied adhesive sheet.
Mounting adapter With some models, you can use adhesive sheet as shown in the illustration to
1�2
attach camera to top of the LCD monitor. 1 Peel separation sheet from the side covered with double-sided tape. 2 Stick adhesive sheet to bottom of the camera. 3 Peel protective film from back of the adhesive sheet. to attach the camera. notebook is turned on. For details on the location of your notebook�s USB
The camera can be disconnected or connected while power your 4 Stick adhesive sheet to the location where you want
connector, refer to the manuals provided with your notebook.
2 Connect camera s cable to the USB connector on
your desktop computer. The camera can be disconnected or connected while the power to your desktop computer is turned on. For details on the location of your desktop computer�s USB connector, refer to the manuals provided with your desktop computer.
Continued on next page
Reproduced from User Guide [4-668-843-01(1) and 4-668-843-11(1)]
Confidential
PCGA-UVC10 (J/AM)
12 GB
13
|
|
|
> |
|
