9. Assemble and Disassemble
1. ASS�Y-COVER TOP 1) Remove two screws fixing the top-cover on back side. 2) Push the top-cover back about 15mm and pull it up. 3) It�s possible to exchange and service Assy-Panel (PCB), the pressure-sensor, the noise-filter, the water valve and trans(option).
15
mm
SCREW
2. FRAME FRONT 1) Remove the top-cover and the ass�y drawer. 2) Remove two screws fixing the control-panel on front side and the screw on right side. 3) Remove the cover-front(L) by using the (-)driver. 4) Pull the lever and open the ass�y-door. 5) Part the diaphragm and the wire diaphragm away from the frame-front. 6) Remove the eight screws fixing the frame-front. 7) It�s possible to exchange and service the heater, the pump, the shock-absorber and the door lock s/w.