Inicio >>
AEG >>
OEKOLAVAMAT1271 Manual de Usuario
0 artículo(s) en Su carrito
Opiniones de los clientes
No hay comentarios de productos.
TEXT_PDF_SNIPPET
How to wash
At the end of the programme
The machine stops automatically and three flashing zeros are displayed. The END and spin speed pilot lights, as well as the pilot light(s) corresponding to the selected option(s), stay on. If the RINSE HOLD option has been selected, the corresponding pilot light on the programme progress display flashes to indicate that the water must be emptied out before opening the door. The pilot light of the START button flashes and tree flashing zeros are displayed. Release of the lock is indicated by an audible signal. Switch the machine off by pressing the ON/OFF button. Turn the programme selector dial to RESET. Remove the laundry from the drum. Check that the drum is empty so as to avoid a subsequent wash being damaged by any forgotten items. Close the water tap. Leave the door open to prevent the formation of mildew and unpleasant smells.
How to dry
Drying only
Warning! Do not exceed the maximum laundry loads: - 2.25 kg for linen and cottons - 1.5 kg for easy-cares. The water tap must be open and the drain hose must be positioned in the sink or connected to the drain pipe. Depress the ON/OFF button to switch the machine on. Select the drying programme (for cotton or easy-cares). Depress the DRYING TIME button until the DRYING TIME time you want appears in the display. Press the START/PAUSE button to start the programme. At the end of the cycle, turn the programme selector dial to RESET and press the ON/OFF button again to switch the appliance off. Remove the laundry.
Automatic washing and drying
(NON-STOP programme)
Warning! For NON-STOP programmes, it is also essential not to exceed the maximum load sizes of 2.25 kg for cotton and 1.5 kg for easy-cares. Load the laundry. Add detergent and additive. Switch the machine on by depressing the ON/OFF button. Select the wash programme. Select eventually the required options by means of the relevant buttons. If possible, do not select a spin speed lower than that proposed by the appliance to avoid a too long drying time so saving energy. Select the drying time. Start the programme by depressing the START/PAUSE button. At the end of the programme, turn the selector dial to RESET and press the ON/OFF button again to switch the machine off. Remove the laundry. 30 31
